Texas Instruments TUSB9261 Demonstration & Reference Design TUSB9261DEMO TUSB9261DEMO 데이터 시트
제품 코드
TUSB9261DEMO
SLLU139 – February 2011
12-V DC Jack
The DEMO Board can operate from a standard DC jack for connecting an external 12-V wall-wart. The
wall-wart should be rated for 12 V with at least a 2-A current rating. The tip of the DC jack has positive
polarity. A wall-wart is not supplied with this reference design demonstration module, leaving it capable of
bus power mode by default. In this mode, only Solid State Drives will work. If other higher current hard
drives are to be used a wall-wart will have to be used.
wall-wart should be rated for 12 V with at least a 2-A current rating. The tip of the DC jack has positive
polarity. A wall-wart is not supplied with this reference design demonstration module, leaving it capable of
bus power mode by default. In this mode, only Solid State Drives will work. If other higher current hard
drives are to be used a wall-wart will have to be used.
7
SLLU139 – February 2011
12-V DC Jack
© 2011, Texas Instruments Incorporated