Texas Instruments LM3445 Evaluation Board LM3445-230VFLBK/NOPB LM3445-230VFLBK/NOPB 사용자 설명서
제품 코드
LM3445-230VFLBK/NOPB
LM3445 230VAC, 8W Isolated Flyback LED Driver Demo Board Schematic
30126901
Warning:
The LM3445 evaluation board has exposed high voltage components that present a shock hazard. Caution must be taken when handling the evaluation
board. Avoid touching the evaluation board and removing any cables while the evaluation board is operating.
board. Avoid touching the evaluation board and removing any cables while the evaluation board is operating.
Warning:
The ground connection on the evaluation board is NOT referenced to earth ground. If an oscilloscope ground lead is connected to the evaluation
board ground test point for analysis and the mains AC power is applied (without any isolation), the fuse (F1) will fail open. For bench evaluation, either
the input AC power source or the bench measurement equipment should be isolated from the earth ground connection. Isolating the evaliation board
(using 1:1 isolation line isolation transformer) rather than the oscilloscope is highly recommended.
board ground test point for analysis and the mains AC power is applied (without any isolation), the fuse (F1) will fail open. For bench evaluation, either
the input AC power source or the bench measurement equipment should be isolated from the earth ground connection. Isolating the evaliation board
(using 1:1 isolation line isolation transformer) rather than the oscilloscope is highly recommended.
Warning:
The LM3445 evaluation board should not be powered with an open load. For proper operation, ensure that the desired number of LEDs are connected
at the output before applying power to the evaluation board.
at the output before applying power to the evaluation board.
www.national.com
2
AN-2069