Texas Instruments UCC28230 Intermediate Bus Converter 300-W Evaluation Module UCC28230EVM UCC28230EVM 데이터 시트
제품 코드
UCC28230EVM
1
Introduction
2
Description
2.1
Typical Applications
2.2
Features
User's Guide
SLUU331 – July 2008
Intermediate Bus Converter 300-W Evaluation Module
The UCC28230 evaluation module, is a 300-W intermediate bus converter, providing an unregulated
output voltage nominally at 9.6V at maximum 300 W of load power with basic isolation of telecom
standard between the primary and the secondary, operating from a dc input between 43 V and 53 V. The
EVM uses the UCC28230 intermediate bus controller which integrates built-in state of the art efficiency
boost features with high-level protection features to provide cost-effective solutions for intermediate bus
architecture applications.
output voltage nominally at 9.6V at maximum 300 W of load power with basic isolation of telecom
standard between the primary and the secondary, operating from a dc input between 43 V and 53 V. The
EVM uses the UCC28230 intermediate bus controller which integrates built-in state of the art efficiency
boost features with high-level protection features to provide cost-effective solutions for intermediate bus
architecture applications.
CAUTION
Proper precautions must be taken when working with the EVM. High voltage
levels and temperature higher than 60 C are present on the EVM when it is
powered on.
levels and temperature higher than 60 C are present on the EVM when it is
powered on.
Intermediate bus converters are key elements in intermediate bus architecture and widely used in telecom
and datacom areas. The EVM provides a platform to evaluate UCC28230 intermediate bus controller from
a telecom input voltage range at rated 300-W output power with possibility to extend the power rating to
500 W (consulting the factory how to make the power expansion).
and datacom areas. The EVM provides a platform to evaluate UCC28230 intermediate bus controller from
a telecom input voltage range at rated 300-W output power with possibility to extend the power rating to
500 W (consulting the factory how to make the power expansion).
The UCC28230EVM features:
•
300-W Output Power Rating with Capability to Operate at 500 W (consulting factory how to make the
power expansion)
power expansion)
•
High Efficiency Peak 96.5% and Over 96% at Full Load
•
Unregulated Output Nominal 9.6 V
•
Input DC Voltage Range Between 43 V and 53 V
•
Wide Load Capacitance Range Between 0
µ
F and 10,000
µ
F
•
Plenty of Test Points to Facilitate the Device Evaluation
•
Prebias Load Turn-On
•
Cycle-by-Cycle Current Limit
•
Output Short Circuit Protection
•
Regulation Down to Zero Output Current
•
Module Size Close to Industry Standard Quarter Brick form Factor with Four Layer Board Layout
Intermediate Bus Converter 300-W Evaluation Module
2
SLUU331 – July 2008