Texas Instruments TLV320AIC3111 Evaluation Module TLV320AIC3111EVM-K TLV320AIC3111EVM-K 데이터 시트
제품 코드
TLV320AIC3111EVM-K
2.6.3
Register Inspector
www.ti.com
EVM + PC
The register inspector dialog (View->Register Inspector
…
) gives access to all registers of the
TLV320AIC3111.
Figure 5. Register Inspector
The register inspector displays the content of the TLV320AIC3111 registers. The control software will read
all TLV320AIC3111 registers when a TLV320AIC3111 EVM is detected. To force reading the content of
one page, click the Refresh button.
all TLV320AIC3111 registers when a TLV320AIC3111 EVM is detected. To force reading the content of
one page, click the Refresh button.
•
The Page edit field selects the page to be displayed.
•
The addr column shows the address of the registers within the selected page in decimal notation.
•
The description column contains a description for each register. If the register has no function
assigned, it is declared Reserved.
assigned, it is declared Reserved.
•
The data columns show the data of each register (one byte). The first data column uses decimal
notation, the second uses hexadecimal notation. It is possible to change the register value by clicking
into one of the data fields and typing the new value (either decimal or hexadecimal).
notation, the second uses hexadecimal notation. It is possible to change the register value by clicking
into one of the data fields and typing the new value (either decimal or hexadecimal).
•
The numbered columns show the register content in binary notation. Read/Write bits are shown solid
black or red; read only bits are gray or dark red. Red numbers represent bits that recently changed. To
change a single writeable bit, click on the bit and it will flip.
black or red; read only bits are gray or dark red. Red numbers represent bits that recently changed. To
change a single writeable bit, click on the bit and it will flip.
SLAU285 – July 2009
TLV320AIC3111 EVM
9