Texas Instruments TSC2017 Evaluation Module TSC2017EVM TSC2017EVM 데이터 시트
제품 코드
TSC2017EVM
www.ti.com
EVM-PDK Operation
As configured at the factory (shown in
), the board is ready to use with the TSC2017EVM.
Table 6. USB-MODEVM Switches and Jumpers Default Position
Switch or Jumper
Setting
SW1-1
ON
SW1
SW1-2
ON
SW2-1
ON
SW2-2
OFF
SW2-3
ON
SW2-4
ON
SW2
SW2-5
ON
SW2-6
ON
SW2-7
ON
SW2-8
OFF
SW3-1
ON
SW3-2
OFF
SW3-3
OFF
SW3-4
OFF
SW3
SW3-5
OFF
SW3-6
OFF
SW3-7
OFF
SW3-8
OFF
JMP1
Installed
JMP2
Installed
JMP3
Removed
JMP4
Removed
JMP5
Connect 2 to 3
JMP6
Connect 1 to 2 (USB)
JMP7
Connect 2 to 3
JMP8
Removed
All switches and jumpers on both the mother- and daughterboards must stay in the manufacturer default
position, as given in
position, as given in
and
6.1.2
Software Installation and Setup
Place the CD-ROM into your PC CD-ROM drive. To install and set up the TSC2017EVM-PDK, execute
the following steps:
the following steps:
1. Go to the Installer directory on this CD-ROM; find and run setup.exe.
2. Accept the license agreement, and continue the installation.
3. Follow the instructions and prompts as they are given.
4. When the installation is completed, click Finish on the TSC2017EVM installer window.
5. Restart your computer. (This step may not be necessary, but is suggested.)
6. When your computer has finished restarting, connect the TSC2017EVM via a USB cable to the
2. Accept the license agreement, and continue the installation.
3. Follow the instructions and prompts as they are given.
4. When the installation is completed, click Finish on the TSC2017EVM installer window.
5. Restart your computer. (This step may not be necessary, but is suggested.)
6. When your computer has finished restarting, connect the TSC2017EVM via a USB cable to the
computer. Microsoft Windows should recognize the new device, and start the Found New Hardware
wizard sequence.
wizard sequence.
7. Select Install from a list or specific location (Advanced), and click on Next>.
8. Select Don't Search. I will Choose the driver to install, and click on Next>.
9. If TSC2017EVM is in the list of Models, click on it to select it. You are done.
10. Otherwise, if it is not there, the Windows Add Hardware wizard provides a list of common hardware
8. Select Don't Search. I will Choose the driver to install, and click on Next>.
9. If TSC2017EVM is in the list of Models, click on it to select it. You are done.
10. Otherwise, if it is not there, the Windows Add Hardware wizard provides a list of common hardware
types; find and click on NI-VISA USB Devices.
11. Click on Have Disk...
12. Select Browse ..., and find the file, TSC2017EVM.inf, which is included with the installer and, by
12. Select Browse ..., and find the file, TSC2017EVM.inf, which is included with the installer and, by
default, is in the directory:
C:\Program Files\Texas Instruments\TSC2017EVM \data\
C:\Program Files\Texas Instruments\TSC2017EVM \data\
13. Select the TSC2017EVM.inf file, and click on it.
14. Your PC then installs it.
15. Click on Finish to finish the installation.
14. Your PC then installs it.
15. Click on Finish to finish the installation.
7
SLAU305A – January 2010 – Revised June 2010
TSC2017EVM and TSC2017EVM-PDK
Copyright © 2010, Texas Instruments Incorporated