Texas Instruments DLP® LightCrafter™ Evaluation Module DLPLIGHTCRAFTER DLPLIGHTCRAFTER 데이터 시트
제품 코드
DLPLIGHTCRAFTER
1
2
3
4
5
7
8
9 10
15
17
6
12
13
14
16
11
DLP LightCrafter's Dimensions
1. Trigger Input and Output
2. Mini USB
3. Power Connector
4. Mini HDMI
5. UART
6. Power Socket
7. I
2
C
8. FPGA SPI Flash Programming Interface
9. MSP430 or DLPC300 Flash Programming Interface
10. On or Off Button – Do not turn off while the Linux system is
booting
11. Input Selection Button (DM365, Internal Test Pattern, or HDMI
input)
12. Ethernet PHY
13. Fan
14. Camera
15. Focus Control
16. Boot Mode Selection Switch
17. Micro-SD card
Figure 1-7. DLP LightCrafter Connector Locations
1.6
DLP LightCrafter's Dimensions
The DLP LightCrafter optical engine is mounted on top of a thermal plate to
provide passive cooling to the module. The DLP3000, 0.3-inch DMD, is
vertically mounted at the end of the optical engine and attached with a
connector to the driver board. The system board is mounted on top of the
driver board. This module has dimensions of 116.5-mm long, 65-mm wide, and
23-mm tall.
provide passive cooling to the module. The DLP3000, 0.3-inch DMD, is
vertically mounted at the end of the optical engine and attached with a
connector to the driver board. The system board is mounted on top of the
driver board. This module has dimensions of 116.5-mm long, 65-mm wide, and
23-mm tall.
illustrates the DLP LightCrafter dimensions.
16
DLP
®
LightCrafter™ Module Overview
DLPU006C – January 2012 – Revised December 2013
Copyright © 2012–2013, Texas Instruments Incorporated