Texas Instruments EVM430-F6736 - MSP430F6736 EVM for Metering EVM430-F6736 EVM430-F6736 데이터 시트
제품 코드
EVM430-F6736
MSP430F673x
MSP430F672x
MSP430F672x
SLAS731C – DECEMBER 2011 – REVISED FEBRUARY 2013
MIXED SIGNAL MICROCONTROLLER
1
FEATURES
2
•
Low Supply Voltage Range:
•
One 16-Bit Timer With Three Capture/Compare
3.6 V Down to 1.8 V
Registers
•
Ultra-Low Power Consumption
•
Three 16-Bit Timers With Two
Capture/Compare Registers Each
Capture/Compare Registers Each
–
Active Mode (AM):
All System Clocks Active
All System Clocks Active
•
Enhanced Universal Serial Communication
265 µA/MHz at 8 MHz, 3.0 V, Flash Program
Interfaces
Execution (Typical)
–
eUSCI_A0, eUSCI_A1, and eUSCI_A2
140 µA/MHz at 8 MHz, 3.0 V, RAM Program
–
Enhanced UART Supports Auto-
Execution (Typical)
Baudrate Detection
–
Standby Mode (LPM3):
–
IrDA Encoder and Decoder
Real-Time Clock With Crystal, Watchdog,
–
Synchronous SPI
and Supply Supervisor Operational, Full
–
eUSCI_B0
RAM Retention, Fast Wake-Up:
1.7 µA at 2.2 V, 2.5 µA at 3.0 V (Typical)
1.7 µA at 2.2 V, 2.5 µA at 3.0 V (Typical)
–
I
2
C With Multi-Slave Addressing
–
Off Mode (LPM4):
–
Synchronous SPI
Full RAM Retention, Supply Supervisor
•
Password-Protected RTC With Crystal Offset
Operational, Fast Wake-Up:
Calibration and Temperature Compensation
1.6 µA at 3.0 V (Typical)
•
Separate Voltage Supply for Backup
–
Shutdown RTC Mode (LPM3.5):
Subsystem
Shutdown Mode, Active Real-Time Clock
–
32-kHz Low-Frequency Oscillator (XT1)
(RTC) With Crystal:
–
Real-Time Clock
1.24 µA at 3.0 V (Typical)
–
Backup Memory (4 x 16 Bits)
–
Shutdown Mode (LPM4.5):
•
Three 24-Bit Sigma-Delta Analog-to-Digital
0.78 µA at 3.0 V (Typical)
(A/D) Converters With Differential PGA Inputs
•
Wake-Up From Standby Mode in 3 µs (Typical)
•
Integrated LCD Driver With Contrast Control
•
16-Bit RISC Architecture, Extended Memory,
for up to 320 Segments in 8-Mux Mode
up to 25-MHz System Clock
•
Hardware Multiplier Supports 32-Bit
•
Flexible Power Management System
Operations
–
Fully Integrated LDO With Programmable
•
10-Bit 200-ksps A/D Converter
Regulated Core Supply Voltage
–
Internal Reference
–
Supply Voltage Supervision, Monitoring,
–
Sample-and-Hold, Autoscan Feature
and Brownout
–
Up to Six External Channels, Two Internal
–
System Operation From up to Two Auxiliary
Channels, Including Temperature Sensor
Power Supplies
•
Three-Channel Internal DMA
•
Unified Clock System
•
Serial Onboard Programming, No External
–
FLL Control Loop for Frequency
Programming Voltage Needed
Stabilization
•
Family Members are Summarized in
–
Low-Power Low-Frequency Internal Clock
Source (VLO)
Source (VLO)
•
Available in 100-Pin and 80-Pin LQFP
Packages
Packages
–
Low-Frequency Trimmed Internal Reference
Source (REFO)
Source (REFO)
•
For Complete Module Descriptions, See the
MSP430x5xx and MSP430x6xx Family User's
MSP430x5xx and MSP430x6xx Family User's
–
32-kHz Crystals (XT1)
Guide (
)
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
I
2
C is a trademark of others.
PRODUCTION DATA information is current as of publication date.
Copyright © 2011–2013, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.