Texas Instruments TLV320AIC3106 Evaluation Module (EVM) and USB motherboard TLV320AIC3106EVM-K TLV320AIC3106EVM-K 데이터 시트
제품 코드
TLV320AIC3106EVM-K
FCC Warnings
This equipment is intended for use in a laboratory test environment only. It generates, uses, and can radiate radio frequency energy and
has not been tested for compliance with the limits of computing devices pursuant to subpart J of part 15 of FCC rules, which are designed
to provide reasonable protection against radio frequency interference. Operation of this equipment in other environments may cause
interference with radio communications, in which case the user at his own expense will be required to take whatever measures may be
required to correct this interference.
has not been tested for compliance with the limits of computing devices pursuant to subpart J of part 15 of FCC rules, which are designed
to provide reasonable protection against radio frequency interference. Operation of this equipment in other environments may cause
interference with radio communications, in which case the user at his own expense will be required to take whatever measures may be
required to correct this interference.
EVM TERMS AND CONDITIONS
Texas Instruments (TI) provides the enclosed Evaluation Module and related material (EVM) to you, the user, (you or user) SUBJECT TO
the terms and conditions set forth below. By accepting and using the EVM, you are indicating that you have read, understand and agree to
be bound by these terms and conditions. IF YOU DO NOT AGREE TO BE BOUND BY THESE TERMS AND CONDITIONS, YOU MUST
RETURN THE EVM AND NOT USE IT.
the terms and conditions set forth below. By accepting and using the EVM, you are indicating that you have read, understand and agree to
be bound by these terms and conditions. IF YOU DO NOT AGREE TO BE BOUND BY THESE TERMS AND CONDITIONS, YOU MUST
RETURN THE EVM AND NOT USE IT.
This EVM is provided to you by TI and is intended for your INTERNAL ENGINEERING DEVELOPMENT OR EVALUATION PURPOSES
ONLY. It is provided “AS IS” and “WITH ALL FAULTS.” It is not considered by TI to be fit for commercial use. As such, the EVM may be
incomplete in terms of required design-, marketing-, and/or manufacturing-related protective considerations, including product safety
measures typically found in the end product. As a prototype, the EVM does not fall within the scope of the European Union directive on
electromagnetic compatibility and therefore may not meet the technical requirements of the directive.
ONLY. It is provided “AS IS” and “WITH ALL FAULTS.” It is not considered by TI to be fit for commercial use. As such, the EVM may be
incomplete in terms of required design-, marketing-, and/or manufacturing-related protective considerations, including product safety
measures typically found in the end product. As a prototype, the EVM does not fall within the scope of the European Union directive on
electromagnetic compatibility and therefore may not meet the technical requirements of the directive.
Should this EVM not meet the specifications indicated in the EVM User’s Guide, it may be returned within 30 days from the date of delivery
for a full refund of any amount paid by user for the EVM, which user agrees shall be user’s sole and exclusive remedy. THE FOREGOING
WARRANTY IS THE EXCLUSIVE WARRANTY MADE BY TI TO USER, AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED,
IMPLIED, OR STATUTORY, INCLUDING ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE OR
NON-INFRINGEMENT.
for a full refund of any amount paid by user for the EVM, which user agrees shall be user’s sole and exclusive remedy. THE FOREGOING
WARRANTY IS THE EXCLUSIVE WARRANTY MADE BY TI TO USER, AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED,
IMPLIED, OR STATUTORY, INCLUDING ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE OR
NON-INFRINGEMENT.
TI shall have no obligation to defend any claim arising from the EVM, including but not limited to claims that the EVM infringes third party
intellectual property. Further, TI shall have no liability to user for any costs, losses or damages resulting from any such claims. User shall
indemnify and hold TI harmless against any damages, liabilities or costs resulting from any claim, suit or proceeding arising from user’s
handling or use of the EVM, including but not limited to, (i) claims that the EVM infringes a third party’s intellectual property, and (ii) claims
arising from the user’s use or handling of the EVM. TI shall have no responsibility to defend any such claim, suit or proceeding.
intellectual property. Further, TI shall have no liability to user for any costs, losses or damages resulting from any such claims. User shall
indemnify and hold TI harmless against any damages, liabilities or costs resulting from any claim, suit or proceeding arising from user’s
handling or use of the EVM, including but not limited to, (i) claims that the EVM infringes a third party’s intellectual property, and (ii) claims
arising from the user’s use or handling of the EVM. TI shall have no responsibility to defend any such claim, suit or proceeding.
User assumes all responsibility and liability for proper and safe handling and use of the EVM and the evaluation of the EVM. TI shall have
no liability for any costs, losses or damages resulting from the use or handling of the EVM. User acknowledges that the EVM may not be
regulatory compliant or agency certified (FCC, UL, CE, etc.). Due to the open construction of the EVM it is the user’s responsibility to take
any and all appropriate precautions with regard to electrostatic discharge.
no liability for any costs, losses or damages resulting from the use or handling of the EVM. User acknowledges that the EVM may not be
regulatory compliant or agency certified (FCC, UL, CE, etc.). Due to the open construction of the EVM it is the user’s responsibility to take
any and all appropriate precautions with regard to electrostatic discharge.
EXCEPT TO THE EXTENT OF THE USER’S INDEMNITY OBLIGATIONS SET FORTH ABOVE, NEITHER PARTY SHALL BE LIABLE TO
THE OTHER FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES WHETHER TI IS NOTIFIED OF THE
POSSIBILITY OR NOT.
THE OTHER FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES WHETHER TI IS NOTIFIED OF THE
POSSIBILITY OR NOT.
TI currently deals with a variety of customers for products, and therefore our arrangement with the user is not exclusive.
TI assumes no liability for applications assistance, customer product design, software performance, or infringement of patents or
services described herein.
services described herein.
User agrees to read the EVM User’s Guide and, specifically, the EVM warnings and Restrictions notice in the EVM User’s Guide prior to
handling the EVM and the product. This notice contains important safety information about temperatures and voltages.
handling the EVM and the product. This notice contains important safety information about temperatures and voltages.
It is user’s responsibility to ensure that persons handling the EVM and the product have electronics training and observe good laboratory
practice standards.
practice standards.
By providing user with this EVM, product and services, TI is NOT granting user any license in any patent or other intellectual property right.
EVM WARNINGS AND RESTRICTIONS
It is important to operate this EVM within the input voltage range of 3.3 V to 5 V and the output voltage range of 0 V to 5 V.
Exceeding the specified input range may cause unexpected operation and/or irreversible damage to the EVM. If there are questions
concerning the input range, please contact a TI field representative prior to connecting the input power.
concerning the input range, please contact a TI field representative prior to connecting the input power.
Applying loads outside of the specified output range may result in unintended operation and/or possible permanent damage to the EVM.
Please consult the EVM User's Guide prior to connecting any load to the EVM output. If there is uncertainty as to the load specification,
please contact a TI field representative.
Please consult the EVM User's Guide prior to connecting any load to the EVM output. If there is uncertainty as to the load specification,
please contact a TI field representative.
During normal operation, some circuit components may have case temperatures greater than 30°C. The EVM is designed to operate
properly with certain components above 85°C as long as the input and output ranges are maintained. These components include but are
not limited to linear regulators, switching transistors, pass transistors, and current sense resistors. These types of devices can be identified
using the EVM schematic located in the EVM User's Guide. When placing measurement probes near these devices during operation,
please be aware that these devices may be very warm to the touch.
properly with certain components above 85°C as long as the input and output ranges are maintained. These components include but are
not limited to linear regulators, switching transistors, pass transistors, and current sense resistors. These types of devices can be identified
using the EVM schematic located in the EVM User's Guide. When placing measurement probes near these devices during operation,
please be aware that these devices may be very warm to the touch.
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2005, Texas Instruments Incorporated