Texas Instruments Evaluation Module for BQ28550, Single Cell Li-Ion Battery Gas Gauge and Protection BQ28550EVM-001 BQ28550EVM-001 데이터 시트

제품 코드

BQ28550EVM-001

bq28550EVM-001 Circuit Module Schematic

Table 2. Bill of Materials (continued)

COUNT

RefDes

Value

Description

Size

Part Number

MFR

—

PCB

2.5 inch x 1.25

PWR041

Any

inch

Notes:

1. These assemblies are ESD sensitive, ESD precautions shall be observed.

2. These assemblies must be clean and free from flux and all contaminants. Use of no-clean flux is not
acceptable.

3. These assemblies must comply with workmanship standards IPC-A-610 Class 2.

4. Ref designators marked with an asterisk (

) cannot be substituted. All other components can be substituted

with equivalent MFG

s components.

5. Make 1 connector wire assembly for each assembly produced, from J1 mate, 4

–

24 Awg wires and Crimp

terminals. Wire colors for Pin numbers are listed below. The wire assemblies shall have a J1 mate respectively
on each end.

Red

—

Pin # 4 (Signal USB_5V)

Brown

—

Pin # 3 (Signal SDA)

White

—

Pin # 2 (Signal SCL)

Black

—

Pin # 1 (GND)

SLUU520

–

July 2011

bq28550 Single Cell Li-Ion Battery Gas Gauge and Protection EVM

2011, Texas Instruments Incorporated