Texas Instruments CC2530ZDK-ZLL 사용자 설명서
swru209b
8/28
External regulated power source (not included in this kit)
The power source can be selected using jumper P11 on the SmartRF05EB. The SmartRF05EB User’s
Guide [6] provides more details.
Guide [6] provides more details.
The SmartRF05 Battery Boards (BB) can be used as a standalone device when equipped with a
CC2530EM. This board is powered by AA batteries. See section 10 in this document for more
information about the SmartRF05BB.
CC2530EM. This board is powered by AA batteries. See section 10 in this document for more
information about the SmartRF05BB.
After assembling the hardware, you now have several options for working with the CC2530:
Run the Sensor Demo ZigBee application that is preprogrammed on the CC2530’s. The
CC2530ZDK Quick Start Guide document [9] included in this kit describes the necessary
steps to run the demonstration.
CC2530ZDK Quick Start Guide document [9] included in this kit describes the necessary
steps to run the demonstration.
Running the packet error rate (PER) test software available for CC2530EM. Chapter 5.3
describes this application.
describes this application.
Evaluate and explore the RF capabilities of the CC2530 using SmartRF Studio. Chapter
5.4 provides the details how to do so.
5.4 provides the details how to do so.
Develop your own software for the CC2530. Install IAR Embedded Workbench for 8051
and set up your first software project. Section 5.5 explains how.
and set up your first software project. Section 5.5 explains how.
Develop your own hardware with the CC2530. See chapter 5.6.
5.2
Running the Preprogrammed ZigBee Sensor Demo
The CC2530EM’s are pre-programmed with a Sensor Demo application used to demonstrate a
temperature monitoring application in a small ZigBee network. The CC2530ZDK Quick Start Guide
document [9] included in this kit describes the necessary steps to run the demonstration.
temperature monitoring application in a small ZigBee network. The CC2530ZDK Quick Start Guide
document [9] included in this kit describes the necessary steps to run the demonstration.
A software package with the source code for the Sensor Demo, and Intel HEX files ready to be
programmed on the devices, is available on the CC2530ZDK web site [11]. A detailed description
about the Sensor Demo application is found in the document CC2530ZDK Sensor Demo User’s Guide
[10].
programmed on the devices, is available on the CC2530ZDK web site [11]. A detailed description
about the Sensor Demo application is found in the document CC2530ZDK Sensor Demo User’s Guide
[10].
5.3
CC2530 PER test
A Packet Error Rate (PER) test application is also available for the CC2530. This application can be
used to evaluate the RF performance of CC2530 using either the hardware included in the kit or other
boards with a CC2530.
used to evaluate the RF performance of CC2530 using either the hardware included in the kit or other
boards with a CC2530.
More information about the PER test application can be found in the documents CC2530DK Quick
Start Guide [12] and CC2530 Software Examples User's Guide [13].
Start Guide [12] and CC2530 Software Examples User's Guide [13].
A software package with the source code for the PER test application, and Intel HEX files ready to be
programmed on the devices, is available on the CC2530DK web site [14].
programmed on the devices, is available on the CC2530DK web site [14].
5.4
Evaluate the CC2530 Radio using SmartRF Studio
SmartRF Studio is a PC application developed for configuration and evaluation of many of the RF-IC
products from Texas Instruments, including the CC2530. The application communicates with the
CC2530 via the USB controller on the SmartRF05EB board. The USB controller uses the debug
interface of the CC2530 to execute commands and to read and write registers.
products from Texas Instruments, including the CC2530. The application communicates with the
CC2530 via the USB controller on the SmartRF05EB board. The USB controller uses the debug
interface of the CC2530 to execute commands and to read and write registers.
SmartRF Studio lets you explore the radio on the CC2530, as it gives you full overview and access to
the radio registers. The tool has a control interface for running basic radio performance tests from the
the radio registers. The tool has a control interface for running basic radio performance tests from the