Texas Instruments Three Input, Thirteen Output, Clock Jitter Cleaner with Dual Cascaded PLLs and Integrated 2.5 GHz VC L LMK04816BEVAL/NOPB 데이터 시트
제품 코드
LMK04816BEVAL/NOPB
L M K 0 4 8 1 6 E V A L U A T I O N B O A R D O P E R A T I N G I N S T R U C T I O N S
SNLU107
26
Appendix A: CodeLoader Usage
Code Loader is used to program the evaluation board with either an LPT port using the included
CodeLoader cable or with a USB port using the optional USB-to-uWire cable available from
CodeLoader cable or with a USB port using the optional USB-to-uWire cable available from
. The part number is USB2UWIRE-IFACE.
Port Setup Tab
Figure 8: Port Setup tab
On the Port Setup tab, the user may select the type of communication port (USB or Parallel) that
will be used to program the device on the evaluation board. If parallel port is selected, the user
should ensure that the correct port address is entered.
The Pin Configuration field is hardware dependent and normally does not need to be changed by
the user. Figure 8 shows the default settings.