Texas Instruments DDC11XEVM-PDK - DDC11xEVM-PDK Evaluation Module DDC11XEVM-PDK DDC11XEVM-PDK 데이터 시트
제품 코드
DDC11XEVM-PDK
DDC11xEVM-PDK Kit Operation
www.ti.com
7.4
Troubleshooting
1. If you see a dialog box as shown in
, or an error message seen on main window status bar
saying Error Writing Registers, this message indicates that the DDCMB is either not connected via
USB or has not been properly detected by the system. Verify that the USB connection is good, or
press the RESET_USB (S1) button on the DDCMB to allow communication to be established.
USB or has not been properly detected by the system. Verify that the USB connection is good, or
press the RESET_USB (S1) button on the DDCMB to allow communication to be established.
Figure 24. USB Error Notification Dialog
24
DDC11xEVM-PDK User's Guide
SLAU234A – October 2007 – Revised July 2010
Copyright © 2007–2010, Texas Instruments Incorporated