Texas Instruments DAC8565EVM - DAC8565 Evaluation Module DAC8565EVM DAC8565EVM 데이터 시트
제품 코드
DAC8565EVM
2.2
EVM Performance
PCB Design and Performance
www.ti.com
Figure 8. Drill Drawing
The EVM performance test is performed using a high-density DAC bench test board, an Agilent 3458A
digital multimeter, and a personal computer (PC) running the LabVIEW™ software. The EVM board is
tested for all codes of 65535 and the device under test (DUT) is allowed to settle for 1 ms before the
meter is read. This process is repeated for all codes to generate the measurements for INL and DNL.
digital multimeter, and a personal computer (PC) running the LabVIEW™ software. The EVM board is
tested for all codes of 65535 and the device under test (DUT) is allowed to settle for 1 ms before the
meter is read. This process is repeated for all codes to generate the measurements for INL and DNL.
through
shows the INL and DNL characteristic plots for each DAC channels of the
DAC8564 and the DAC8565, respectively.
8
DAC8564/65 Evaluation Module
SLAU252 – June 2008