Texas Instruments The ADCRF2LA FMC to Logic Analyzer Adapter Board for the ADC12D1x00RFRB ADCRF2LA/NOPB ADCRF2LA/NOPB 데이터 시트
제품 코드
ADCRF2LA/NOPB
- 34 -
Copyright 2011 National Semiconductor Corporation
5.0 Electrical Specification
Power Supply:
Nominal = 7.5V
Minimum = 7.0V, Maximum = 8.0V
(Voltages outside these levels will cause damage!!)
Power Consumption: Nominal = 10 Watts
Maximum = 20 Watts
ADC Input Signals:
Maximum Operating Voltage = see datasheet
Recommended/initial (full scale) generator setting = 0 dBm
(The maximum level at the signal generator is dependent upon the insertion
loss from other hardware before the ADC inputs. Care should be taken not to
exceed the Operating Ratings at the ADC input.)
loss from other hardware before the ADC inputs. Care should be taken not to
exceed the Operating Ratings at the ADC input.)
Clock Input Signal:
Maximum Operating Voltage = +2.0V
Recommended generator setting = +1 dBm
(The maximum level at the signal generator is dependent upon the insertion
loss from other hardware before the clock inputs. Care should be taken not to
exceed the maximum limits at the clock inputs.)
exceed the maximum limits at the clock inputs.)
USB Port:
USB 2.0 compliant