Texas Instruments DAC34SH84EVM - DAC34SH84 Evaluation Module DAC34SH84EVM DAC34SH84EVM 데이터 시트
제품 코드
DAC34SH84EVM
Basic Test Procedure with TSW3100
•
Check the “LOAD and Run” box
•
Press the
green
“Create” button
•
Toggle the SIF SYNC button of the DAC348x EVM GUI to synchronize the appropriate digital
blocks, if the example file with NCO setting is used.
blocks, if the example file with NCO setting is used.
•
Verify the spectrum using the Spectrum Analyzer at the four IF outputs of the DAC348x EVM (J7, J6,
J3, and J2).
J3, and J2).
–
For the DAC3482 EVM, the IF outputs are at the J6 and J3 SMA connector
•
The expect results are shown in
(NCO enabled at 30MHz) and
(NCO disabled).
Figure 17. TSW3100 CommSignalPattern (WCDMA) Programming GUI for DAC3484
18
DAC348x EVM
SLAU432 – February 2012
Copyright © 2012, Texas Instruments Incorporated