Texas Instruments TPS650241EVM Evaluation Module TPS650241EVM-234 TPS650241EVM-234 데이터 시트
제품 코드
TPS650241EVM-234
www.ti.com
2
Setup
2.1
Input/Output Connector Descriptions
2.1.1
J2 — VIN
2.1.2
J5 — GND
2.1.3
J1 — VDCDC1
2.1.4
J3 — GND
2.1.5
J4 — VDCDC2
2.1.6
J6 — GND
2.1.7
J7 — VDCDC3
2.1.8
J8 — GND
2.1.9
J9 — VLD01
2.1.10
J10 — GND
2.1.11
J11 — VLD02
Setup
This section describes the jumpers and connectors on the EVM as well as how to properly connect, setup,
and use the TPS650241EVM-234.
and use the TPS650241EVM-234.
Input voltage from the external power supply, recommended maximum is 5.5V. The input current is
dependent on the load, but is typically below 2A.
dependent on the load, but is typically below 2A.
This is the return connection for VIN
Output from the DCDC1 switching regulator, maximum output current is 1.6A. The default voltage setting
is 3.3V.
is 3.3V.
Return for VDCDC1.
Output from the DCDC2 switching regulator, maximum output current is 1A. The default voltage setting is
2.5V
2.5V
Return for VDCDC2.
Output from the switching regulator DCDC3, maximum output current is 800mA. The default value is
1.375V.
1.375V.
Return for VDCDC3.
Output from the low drop out regulator VLDO1, maximum output current is 200mA. The default value is
1.5V.
1.5V.
Return for VLDO1.
Output from the low drop out regulator VLDO2, maximum output current is 200mA. The default value is
1.5V.
1.5V.
TPS650241EVM
2
SLVU218 – August 2007