Texas Instruments TMP104 Evaluation Module TMP104EVM TMP104EVM 데이터 시트
제품 코드
TMP104EVM
TMP104EVM Software Overview
5
TMP104EVM Software Overview
This section discusses how to use the TMP104EVM software.
5.1
Starting the TMP104EVM Software
The TMP104 software can be operated through the Windows Start menu. From Start, select All Programs;
then select the TMP104EVM program.
then select the TMP104EVM program.
illustrates how the software should appear if the TMP104EVM is functioning properly.
Figure 10. TMP104EVM Software Interface
shows an error message that is displayed if the PC cannot communicate with the EVM. If you
receive this error message, first check to see that the USB extension cable is properly connected to both
the PC USB port and to the SM-USB-DIG platform. Another possible source for this error is a problem
with the PC USB Human Interface Device driver. Make sure that the device is recognized when the USB
cable is plugged in; recognition is indicated by a Windows-generated confirmation sound.
the PC USB port and to the SM-USB-DIG platform. Another possible source for this error is a problem
with the PC USB Human Interface Device driver. Make sure that the device is recognized when the USB
cable is plugged in; recognition is indicated by a Windows-generated confirmation sound.
Figure 11. Communication Error with the TMP104EVM
10
TMP104EVM Evaluation Board and Software Tutorial
SBOU118
–
October 2011
Copyright
©
2011, Texas Instruments Incorporated