Texas Instruments DAC7568EVM - DAC7568 Evaluation Module DAC7568EVM DAC7568EVM 데이터 시트
제품 코드
DAC7568EVM
EVM Overview
www.ti.com
1
EVM Overview
•
Full-featured Evaluation Board for the 12-/14-/16-bit, eight-channel DAC7568, DAC8168, or DAC8568
digital-to-analog converters
digital-to-analog converters
•
Onboard reference and buffer circuits
•
High-speed serial interface
•
Modular design for use with a variety of DSP and DACxx68 DAC Controller Interface Boards
2
Analog Interface
For maximum flexibility, the DACxx68EVM is designed for easy interfacing to multiple analog sources.
Samtec part numbers SSW-110-22-F-D-VS-K and TSM-110-01-T-DV-P provide a convenient 10-pin,
dual-row header/socket combination at J2. This header/socket provides access to the analog input pins of
the ADC. Consult Samtec at
Samtec part numbers SSW-110-22-F-D-VS-K and TSM-110-01-T-DV-P provide a convenient 10-pin,
dual-row header/socket combination at J2. This header/socket provides access to the analog input pins of
the ADC. Consult Samtec at
or call 1-800-SAMTEC-9 for a variety of mating connector
options.
Pin Number
Signal
Description
J2.2
DAC OUT_G
Voltage output for DAC channel G
J2.4
DAC OUT_E
Voltage output for DAC channel E
J2.6
DAC OUT_C
Voltage output for DAC channel C
J2.8
DAC OUT_A
Voltage output for DAC channel A
J2.10
DAC OUT_B
Voltage output for DAC channel B
J2.12
DAC OUT_D
Voltage output for DAC channel D
J2.14
DAC OUT_F
Voltage output for DAC channel F
J2.16
DAC OUT_H
Voltage output for DAC channel H
J2.18
REF(–)
Unused
J2.20
REF(+)
External reference source input (2.5 V NOM, 2.525 V maximum)
J2.15
VCOM
Common-mode voltage output option
J2.1–J2.19 (odd)
AGND
Analog ground connections (except J2.15)
3
Digital Interface
The DACxx68EVM is designed for easy interfacing to multiple control platforms. Samtec part numbers
SSW-110-22-F-D-VS-K and TSM-110-01-T-DV-P provide a convenient 10-pin, dual-row header/socket
combination at J2. This header/socket provides access to the digital control and serial data pins of the
DACxx68 DAC EVM. Consult Samtec at
SSW-110-22-F-D-VS-K and TSM-110-01-T-DV-P provide a convenient 10-pin, dual-row header/socket
combination at J2. This header/socket provides access to the digital control and serial data pins of the
DACxx68 DAC EVM. Consult Samtec at
or 1-800-SAMTEC-9 for a variety of mating
connector options.
Table 1. Digital Control
Pin Number
Signal
Description
J2.1
CNTL
Active-low input to SYNC enables data transfer – jumper configurable (see schematic) via JP5
J2.3
SCLK
Serial clock
J2.5
SCLK(R)
Serial clock return (for DSP host systems)
J2.7
FSX
Frame synchronization for DSP host systems – default SYNC input through JP5 (see schematic)
J2.9
FS(R)
Frame synchronization return (for DSP host systems)
J2.11
DX
Serial data input
J2.13
DR
Unused – Serial data return (for DSP host systems)
J2.15
INT
External source for LOAD DAC (LDAC) strobe via JP6
J2.17
TOUT
Default source for LOAD DAC (LDAC) strobe via JP6
J2.19
GPIO5
Optional source for active low CLEAR (CLR) input
2
DACxx68EVM
SLAU301 – November 2009
Copyright © 2009, Texas Instruments Incorporated