Texas Instruments TPA2031D1 Evaluation Module (EVM) TPA2031D1EVM TPA2031D1EVM 데이터 시트
제품 코드
TPA2031D1EVM
EVM IMPORTANT NOTICE (CATEGORY B)
IMPORTANT: TI is providing the enclosed TPA2031D1 EVM evaluation module under the following conditions:
This evaluation module (EVM) being provided by Texas Instruments (TI) is intended for use for ENGINEERING DEVELOPMENT OR
EVALUATION PURPOSES ONLY and is not considered by Texas Instruments to be fit for commercial use. As such, this EVM may not be
complete in terms of design and/or manufacturing related protective considerations including product safety measures typically found in the
end-product incorporating the module. As a prototype, this product does not fall within the scope of the European Union Directive on
electromagnetic compatibility and on low voltage and therefore may not meet the technical requirements of the directive. This EVM is not
subject to the EU marking requirements.
EVALUATION PURPOSES ONLY and is not considered by Texas Instruments to be fit for commercial use. As such, this EVM may not be
complete in terms of design and/or manufacturing related protective considerations including product safety measures typically found in the
end-product incorporating the module. As a prototype, this product does not fall within the scope of the European Union Directive on
electromagnetic compatibility and on low voltage and therefore may not meet the technical requirements of the directive. This EVM is not
subject to the EU marking requirements.
•
Should this EVM not meet the specifications indicated in the User’s Guide the EVM may be returned within 30 days from the
date of delivery for a full refund. THE FOREGOING WARRANTY IS THE EXCLUSIVE WARRANTY MADE BY TI AND IS IN LIEU
OF ALL OTHER WARRANTIES, EXPRESSED, IMPLIED, OR STATUTORY, INCLUDING ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE.
date of delivery for a full refund. THE FOREGOING WARRANTY IS THE EXCLUSIVE WARRANTY MADE BY TI AND IS IN LIEU
OF ALL OTHER WARRANTIES, EXPRESSED, IMPLIED, OR STATUTORY, INCLUDING ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE.
•
The user assumes all responsibility and liability for proper and safe handling of the EVM. The user acknowledge that the use of the
EVM could present serious hazards and that it is the user’s responsibility to take all precautions for the handling and use of the EVMs
in accordance with good laboratory practices. Please be aware that the products received may not be regulatory compliant or agency
certified (FCC, UL, etc.). Due to the open construction of the product, it is the user’s responsibility to take any and all appropriate
precautions with regard to electrostatic discharge.
EVM could present serious hazards and that it is the user’s responsibility to take all precautions for the handling and use of the EVMs
in accordance with good laboratory practices. Please be aware that the products received may not be regulatory compliant or agency
certified (FCC, UL, etc.). Due to the open construction of the product, it is the user’s responsibility to take any and all appropriate
precautions with regard to electrostatic discharge.
•
NEITHER PARTY WILL BE LIABLE TO THE OTHER FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES.
DAMAGES.
•
TI is currently dealing with various customers for products, and therefore our arrangement with the user will not be exclusive.
•
TI assumes no liability for applications assistance, customer product design, software performance, or infringement of
patents or services described herein.
patents or services described herein.
•
Please read the User’s Guide and specifically the section in the User’s Guide pertaining to warnings and restrictions prior to handling
the product. This section contains important information regarding high temperature and voltages which TI recommends to be read
before handling the EVMs. In case of any doubt regarding safety, please contact the TI application engineer.
the product. This section contains important information regarding high temperature and voltages which TI recommends to be read
before handling the EVMs. In case of any doubt regarding safety, please contact the TI application engineer.
•
Persons handling the product should have electronics training and observe good laboratory practice standards.
•
No license is granted under any patent right or other intellectual property right of TI covering or relating to any combination, machine,
or process in which such TI products or services might be or are used.
or process in which such TI products or services might be or are used.
•
This Agreement is subject to the laws of the State of Texas, excluding the body of conflicts of laws and the United Nations Convention
on the International Sale of Goods, and will be subject to the exclusive jurisdiction of the courts of the State of Texas.
on the International Sale of Goods, and will be subject to the exclusive jurisdiction of the courts of the State of Texas.
FCC Warning
This evaluation board/kit is intended for use for ENGINEERING DEVELOPMENT, DEMONSTRATION, OR EVALUATION PURPOSES
ONLY and is not considered by TI to be a finished end-product fit for general customer use. It generates, uses, and can radiate radio
frequency energy and has not been tested for compliance with the limits of computing devices pursuant to part 15 of FCC rules, which are
designed to provide reasonable protection against radio frequency interference. Operation of this equipment in other environments may
cause interference with radio communications, in which case the user at his own expense will be required to take whatever measures may
be required to correct this interference.
ONLY and is not considered by TI to be a finished end-product fit for general customer use. It generates, uses, and can radiate radio
frequency energy and has not been tested for compliance with the limits of computing devices pursuant to part 15 of FCC rules, which are
designed to provide reasonable protection against radio frequency interference. Operation of this equipment in other environments may
cause interference with radio communications, in which case the user at his own expense will be required to take whatever measures may
be required to correct this interference.
EVM WARNINGS AND RESTRICTIONS
It is important to operate this EVM within the input voltage and the output voltage ranges as specified in the table below.
Input Range, V
S
2.5 V to 5.5 V
Input Range, V
I
-0.3 V to 6 V NOT TO EXCEED VS+ or VS-
Output Range, V
O
-0.3 V to VDD +0.3 NOT TO EXCEED VS+ or VS-
Exceeding the specified input range may cause unexpected operation and/or irreversible damage to the EVM. If there are questions
concerning the input range, please contact a TI field representative prior to connecting the input power.
concerning the input range, please contact a TI field representative prior to connecting the input power.
Applying loads outside of the specified output range may result in unintended operation and/or possible permanent damage to the EVM.
Please consult the EVM User's Guide prior to connecting any load to the EVM output. If there is uncertainty as to the load specification,
please contact a TI field representative.
Please consult the EVM User's Guide prior to connecting any load to the EVM output. If there is uncertainty as to the load specification,
please contact a TI field representative.
During normal operation, some circuit components may have case temperatures greater than 85
°
C. The EVM is designed to operate
properly with certain components above 85
°
C as long as the input and output ranges are maintained. These components include but are
not limited to linear regulators, switching transistors, pass transistors, and current sense resistors. These types of devices can be identified
using the EVM schematic located in the EVM User's Guide. When placing measurement probes near these devices during operation,
please be aware that these devices may be very warm to the touch.
using the EVM schematic located in the EVM User's Guide. When placing measurement probes near these devices during operation,
please be aware that these devices may be very warm to the touch.
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2008, Texas Instruments Incorporated