Texas Instruments MSP430F677xIPEU & MSP430F677x1IPEU 128-Pin target board MSP-TS430PEU128 MSP-TS430PEU128 데이터 시트
제품 코드
MSP-TS430PEU128
ECCN 5E002 TSPA - Technology / Software Publicly Available
MSP430F677x
,
MSP430F676x
,
MSP430F674x
SLAS768D – SEPTEMBER 2012 – REVISED DECEMBER 2013
Polyphase Metering SoCs
1
FEATURES
2
•
Accuracy < 0.1% Over 2000:1 Dynamic Range
•
Multiple Low-Power Modes
for Phase Current
–
Standby Mode (LPM3): 2.1 µA at 3 V,
•
Meets or Exceeds ANSI C12.20 and IEC 62053
Wake Up in Less Than 5 µs
Standards
–
RTC Mode (LPM3.5): 0.34 µA at 3 V
•
Support for Multiple Sensors Such as Current
–
Shutdown Mode (LPM4.5): 0.18 µA at 3 V
Transformers, Rogowski Coils, or Shunts
•
Up to 512KB of Single-Cycle Flash
•
Power Measurement for up to Three Phases
•
Up to 32KB of RAM With Single-Cycle Access
Plus Neutral
•
Up to Seven Independent 24-Bit Sigma-Delta
•
Dedicated Pulse Output Pins for Active and
ADCs With Differential Inputs and Variable
Reactive Energy for Calibration
Gain
•
Four-Quadrant Measurement per Phase or
•
System 10-Bit 200-ksps ADC
Cumulative
–
Six Channels Plus Supply and Temperature
•
Exact Phase Angle Measurements
Sensor Measurement
•
Digital Phase Correction for Current
•
Integrated Hardware AES-128 Module for
Transformers
Encryption
•
Temperature Compensated Energy
•
Six Enhanced Communications Ports
Measurements
–
Configurable Among Four UART, Six SPI,
•
40-Hz to 70-Hz Line Frequency Range Using
and Two I²C Interfaces
Single Calibration
•
Four 16-Bit Timers With Nine Total
•
Flexible Power Supply Options With Automatic
Capture/Compare Registers
Switching
•
128-Pin LQFP (PEU) Package With 90 I/O Pins
•
Display Operates at Very Low Power During
•
100-Pin LQFP (PZ) Package With 62 I/O Pins
AC Mains Failure: 3 µA in LPM3
•
Industrial Temperature Range of –40°C to 85°C
•
LCD Driver With Contrast Control for up to 320
•
3-Phase Electronic Watt-Hour Meter
Segments
Development Tools
•
Password-Protected Real-Time Clock With
–
With
App Note
Crystal Offset Calibration and Temperature
Compensation
Compensation
–
•
Integrated Security Modules to Support Anti-
•
For Complete Module Descriptions, See the
Tamper and Encryption
MSP430x5xx and MSP430x6xx Family User's
Guide (
Guide (
)
•
Multiple Communication Interfaces for Smart
Meter Implementations
Meter Implementations
APPLICATIONS
•
High-Performance 25-MHz CPU With 32-Bit
•
3-Phase Electronic Watt-Hour Meters
Multiplier
•
Utility Metering
•
Wide Input Supply Voltage Range:
3.6 V Down to 1.8 V
3.6 V Down to 1.8 V
•
Energy Monitoring
•
Ultra-Low-Power Consumption During Energy
Measurement
Measurement
–
2.9 mW at 10-MHz Operation (3 V)
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
MSP430, Code Composer Studio are trademarks of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Copyright © 2012–2013, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.