Texas Instruments DAC5688 Evaluation Module DAC5688EVM DAC5688EVM 데이터 시트
제품 코드
DAC5688EVM
Software Installation
www.ti.com
1.3.1
Voltage Limits
CAUTION
Exceeding the maximum input voltages can damage EVM components.
Undervoltage may cause improper operation of some or all of the EVM
components.
Undervoltage may cause improper operation of some or all of the EVM
components.
2
Software Installation
The DAC5668/88/89EVM comes with a software package that allows the user to configure the DAC and
CDCM7005 registers, save and load register settings to/from text files, and visualize the data path through
the DAC. Communication with the EVM is achieved through a USB port on the host PC. The DAC5668
and the DAC5688 shares the same EVM software since both DACs have internal PLL/VCO. The
DAC5689 has a stand-alone EVM software.
CDCM7005 registers, save and load register settings to/from text files, and visualize the data path through
the DAC. Communication with the EVM is achieved through a USB port on the host PC. The DAC5668
and the DAC5688 shares the same EVM software since both DACs have internal PLL/VCO. The
DAC5689 has a stand-alone EVM software.
2.1
Minimum Requirements
Before installing the software, verify that the PC meets the following requirements:
•
Microsoft Windows™ 2000 or later operating system
•
1024 × 768 screen resolution for optimal viewing
•
USB 1.1 or later compatible input port
Other configurations may work; however, they remain untested.
2.2
Installing the EVM Control Software
Double-click the setup.exe file located on the installation CD. The EVM Installation Wizard opens.
Figure 1. DAC5668/88/89/89EVM Install Screen
2
DAC5668/88/89EVM
SLAU241A – June 2008 – Revised March 2010
Copyright © 2008–2010, Texas Instruments Incorporated