Texas Instruments Multi-Cal-System Basic Starter Kit MULTI-CAL-SYSTEM MULTI-CAL-SYSTEM 데이터 시트
제품 코드
MULTI-CAL-SYSTEM
Multi-Cal-Test PCA
Jumper-selected
SensorEmulator
DSUB9 connects
to interface board
Jumper-selected
PGA308 configuration
Overview
shows the Multi-Cal-Test PCA card. The Multi-Cal-Test card contains a PGA308 with associated
electronics, jumpers for mode configuration, and a sensor emulator. The equivalent PGA309 test board
does not exist at the time of this writing; it is currently under development. The Multi-Cal-Test board can
be used to verify that the system is functional before connecting your sensor modules. The Multi-Cal-Test
PCA can also be used to demonstrate the accuracy capability of the system. The Multi-Cal-Test PCA is
also a good tool for learning how to use the system.
does not exist at the time of this writing; it is currently under development. The Multi-Cal-Test board can
be used to verify that the system is functional before connecting your sensor modules. The Multi-Cal-Test
PCA can also be used to demonstrate the accuracy capability of the system. The Multi-Cal-Test PCA is
also a good tool for learning how to use the system.
Figure 4. Multi-Cal-Test PCA Card
5
SBOU087A
–
August 2010
–
Revised April 2011
Multi-Cal-System Evaluation Module
Copyright
©
2010
–
2011, Texas Instruments Incorporated