Texas Instruments LM3528TM Evaluation Board LM3528TMEV LM3528TMEV 데이터 시트
제품 코드
LM3528TMEV
Board Operation
Figure 4. Mid Layer 2(Board Layout)
Figure 5. Bottom View (Board Layout)
4
Board Operation
To operate the LM3528 evaluation board, connect a 2.5 V to 5.5 V supply between the IN header and
GND and attach an I
GND and attach an I
2
C interface using one of the methods described in
5
External Control Interface
There are two methods for controlling the LM3528 evaluation board. The first option is via a Texas
Instruments USB interface board. The second option is by using the SDA and SCL headers available on
the upper left corner of the board. When option 1 is used, the USBL and USBR connectors plug directly
into a Texas Instruments USB interface board. The connectors are keyed so they will only fit one way. On
the LM3528 evaluation board the V
Instruments USB interface board. The second option is by using the SDA and SCL headers available on
the upper left corner of the board. When option 1 is used, the USBL and USBR connectors plug directly
into a Texas Instruments USB interface board. The connectors are keyed so they will only fit one way. On
the LM3528 evaluation board the V
IN
/VUSB jumper allows for power to come from IN or from the USB .
5
SNVA336A – August 2008 – Revised April 2013
AN-1823 LM3528 Evaluation Board
Copyright © 2008–2013, Texas Instruments Incorporated