Texas Instruments TPS65217C Evaluation Module TPS65217CEVM TPS65217CEVM 데이터 시트
제품 코드
TPS65217CEVM
Software
8
Software
8.1
Software Installation Instruction
The following section explains the procedure for installing the Graphical User Interface (GUI) onto a
Windows based PC. A USB interface adapter is required to connect the EVM to a PC and should have
been provided with the EVM.
Windows based PC. A USB interface adapter is required to connect the EVM to a PC and should have
been provided with the EVM.
Additional interfaces can be ordered through
To install the EVM software follow the steps outlined:
•
Copy the TPS65217_1p1.zip to your computer and extract all files.
•
Double-click on the setup.exe file in the TPS65217 GUI 1p1\Volume directory
•
Follow the prompts to finish the installation.
•
At the end of the installation, a reboot of your computer may be required.
Figure 4. The setup.exe. File is Located in the Volume Directory
I
2
C read/write commands may be made using the provided software. Registers 0x00 through 0x0F are
available in the “Basic 1” tab. Registers 0x10 through 0x1E are available in the “Basic 2” tab. A dark grey
block means the bit is ‘high’. A light grey block means the bit is ‘low’. A write may be performed simply by
clicking on an individual bit; or, an entire register may be written by using the write command on the left
side of the GUI.
block means the bit is ‘high’. A light grey block means the bit is ‘low’. A write may be performed simply by
clicking on an individual bit; or, an entire register may be written by using the write command on the left
side of the GUI.
8
TPS65217 EVM
SLVU580B – November 2011 – Revised June 2012
Copyright © 2011–2012, Texas Instruments Incorporated