Texas Instruments CDCUN1208LP Evaluation Module CDCUN1208LPEVM CDCUN1208LPEVM 데이터 시트
제품 코드
CDCUN1208LPEVM
Using the EVM ontrol Software
Figure 2. CDCUN1208LP Control User Interface
6
Using the EVM ontrol Software
The graphical layout of the programming software is based on the functional structure of the
CDCUN1208LP. Using the tool, the user can select Input type, Input Divider, Input MUX and Output type.
CDCUN1208LP. Using the tool, the user can select Input type, Input Divider, Input MUX and Output type.
IN1 and IN2 Reference Signal Type Selection
Input clock type can be selected using the pull-down menu (LVDS, HCSL, or LVCMOS)
Input clock type can be selected using the pull-down menu (LVDS, HCSL, or LVCMOS)
Input divider (REF2_DIV) for IN2 Input Selection
The IN2 reference input has a divider (REF2_DIV)). Appropriate divider values (1, 2, 4, and 8) can be
selected by clicking on the input divider block.
The IN2 reference input has a divider (REF2_DIV)). Appropriate divider values (1, 2, 4, and 8) can be
selected by clicking on the input divider block.
Input MUX Selection
The CDCUN1208LP employs a Smart Multiplexer that supports manual and automatic switching between
IN1 and IN2. Toggling the input MUX box, the proper reference input or auto mode can be selected.
The CDCUN1208LP employs a Smart Multiplexer that supports manual and automatic switching between
IN1 and IN2. Toggling the input MUX box, the proper reference input or auto mode can be selected.
Output Signal Type Selection
4
CDCUN1208LP Evaluation Board
SCAU050 – May 2012
Copyright © 2012, Texas Instruments Incorporated