Texas Instruments BQ24292IEVM-021 Single Cell Charger with Narrow VDC Power Path Management Evaluation Module BQ24292IEV BQ24292IEVM-021 데이터 시트
제품 코드
BQ24292IEVM-021
Introduction
1
Introduction
1.1
EVM Features
Refer to the respective data sheet (shown in
) for detailed features and operation.
Table 1. Device Data Sheet
Device Name
Literature Number
bq24190/2/2i/3
bq24196
bq24292i
The bq24x9x evaluation module (EVM) is a complete charger module for evaluating an I
2
C-controlled
single NVDC-1 charge using the bq24x9x devices.
This EVM does not include the USB-to-GPIO interface board. To evaluate the bq24x9x EVM, a USB-to-
GPIO interface board must be ordered separately.
GPIO interface board must be ordered separately.
1.2
I/O Descriptions
lists the jumper connections available on this EVM.
Table 2. EVM Connections
Jack
Description
J1 – PMID
PMID pin connection/Power bank output
J1 – VBUS
Input: positive terminal
J1 – GND
Input: negative terminal (ground terminal)
J2 – SYS
Connected to system
J2 – BAT+
Connected to battery pack
J2 – GND
Ground
J3
USB-to-GPIO connector (USB Interface Adapter Connector - HPA172)
J4 – INT
INT pin connection
J4 – OTG
OTG pin connection
J4-CE
CE pin connection
J4-GND
Ground
J5-TS2
External TS2 pin connection
J5-GND
Ground
J6-TS1
External TS1 pin connection
J6-GND
Ground
J7
Mini_USB Connector
2
bq24190/2/2i/3/6 and bq24292i EVM (PWR021) User's Guide
SLUUA14C – October 2012 – Revised August 2013
Copyright © 2012–2013, Texas Instruments Incorporated