Texas Instruments LDC1000EVM - Evaluation Module for Inductance to Digital Converter with Sample PCB Coil LDC1000EVM LDC1000EVM 사용자 설명서
제품 코드
LDC1000EVM
Chapter 3
SNAU150 – September 2013
Inductive Sensing GUI User Guide
3.1
Inductive Sensing GUI Overview
The inductive sensing GUI provides graphical configuration and streaming support for the LDC1000. The
GUI package includes drivers for use with the LDC1000 Evaluation Modules (EVM). The EVM
provides a device abstraction layer for the GUI to communicate with the LDC1000 through SPI, and
includes other extended functionality.
GUI package includes drivers for use with the LDC1000 Evaluation Modules (EVM). The EVM
provides a device abstraction layer for the GUI to communicate with the LDC1000 through SPI, and
includes other extended functionality.
3.2
Host platform Requirements
The Inductive Sensing GUI supports:
•
32-bit and 64-bit Windows 7
•
32-bit and 64-bit Windows XP
The host machine is required for device configuration and data streaming.
3.3
EVM Information
For the TI LDC1000 EVM:
•
The EVM allows the GUI to:
–
Configuring register data through SPI (CSB, SCLK, SDO, SDI)
–
Stream register data through SPI
–
Stream register data through SPI
–
Detect interrupts through SPI
3.4
Hardware Setup
Below are the steps which are necessary to prepare the EVM for the GUI:
•
The GUI must be installed on the host.
•
The EVM driver must be installed on the host.
•
The EVM must be connected to a full speed USB port (1.0 or above).
3.5
Icon Toolbar
The icon toolbar contains various icons which navigate between sections and perform various functions.
Figure 3-1. Icon Toolbar
7
SNAU150 – September 2013
Inductive Sensing GUI User Guide
Copyright © 2013, Texas Instruments Incorporated