Texas Instruments 16-channel LVDS Receiver Evaluation Module SN65LVDS386EVM SN65LVDS386EVM 데이터 시트

 Trademarks

iii

  Read This First

This is the user’s guide for the SN65LVDS387EVM and SN65LVDS386 evalu-
ation modules (EVMs). It contains information on the evaluation modules
(EVMs) for Texas Instruments’ SN65LVDS387 16-channel LVDS driver and for
the SN65LVDS386 16-channel LVDS receiver.

Two separate EVMs are available, allowing each LVDS device to be tested
individually using a single EVM for that device. If both EVMs are used, the
LVDS output signals from the SN65LVDS387EVM 16-channel LVDS driver
can be connected to the LVDS inputs of the 16-channel LVDS receiver on the
SN65LVDS386EVM. This allows users to simulate performance of an LVDS
system. Recommended test equipment and evaluation and interconnect
guidelines are provided for both 16-channel point-to-point and multidrop
configurations. The EVMs are CE compliant for distribution within the
European Community.

This document contains the following chapters:

Chapter 1 – Introduction

Chapter 2 – The Evaluation Boards

Chapter 3 – Equipment Required

Chapter 4 – Operation

Appendix A – Parts List and Schematics

BergStick is a registered trademark of Berg Electronics. All other trademarks
are the property of their respective owners.