Texas Instruments USB I²C Interface Board I2C-CPEV/NOPB I2C-CPEV/NOPB 데이터 시트
제품 코드
I2C-CPEV/NOPB
Introduction
1
Introduction
The USB I
2
C Interface board interacts with your application hardware via an USB port in a PC. The
microcontroller with flash memory enables to control your application hardware and develop specific
application functions via software. (Texas Instruments does not provide interaction software, which
networks both application board and I
application functions via software. (Texas Instruments does not provide interaction software, which
networks both application board and I
2
C board).
2
USB I
2
C Interface Board Key Features
•
TI’s COP8CBE9 microcontroller in a TSSOP package
•
TI’s USBN9604 IC in a 28-pin PLGA package
•
USB 2.0 compatible
•
Bus powered
•
24 MHz clock from crystal
•
8–pin analog inputs for A/D converter
3
Block Diagram
shows basic connections between the PC, USB I
2
C Interface Module, and application board.
Figure 1. Block Diagram
4
System Requirements
The following requirements are vital in order to use the USB I
2
C Interface Module:
System Requirements
•
Windows Operating System (Win98/ME/2000/XP)
•
32 MB RAM minimum)
•
2 MB available for disk space
4.1
Hardware Requirements
•
5-Pin Mini-B USB 2.0 cable (sold separately)
2
SNVA343A – April 2008 – Revised April 2013
AN-1840 USB I
2
C Interface Board Reference Manual
Copyright © 2008–2013, Texas Instruments Incorporated