Texas Instruments 20A Stackable Single Phase Synchronous Buck Converter Evaluation Module TPS40180EVM TPS40180EVM 데이터 시트
제품 코드
TPS40180EVM
www.ti.com
1
Introduction
2
Description
2.1
Applications
2.2
Features
Introduction
The TPS40180EVM evaluation module (EVM) is a stackable single phase synchronous buck converter.
The EVM delivers 1.5V at 20A. Each EVM is stackable with another EVM to provide higher output current.
The module uses the TPS40180 Synchronous Buck Controller.
The EVM delivers 1.5V at 20A. Each EVM is stackable with another EVM to provide higher output current.
The module uses the TPS40180 Synchronous Buck Controller.
TPS40180EVM is designed to use a regulated 10.8V to 13.2V bus to produce a high current, regulated
output. The output is capable of supplying up to 20A of load current. The TPS40180EVM is designed to
demonstrate the TPS40180 in a typical regulated bus to low-voltage application while providing a number
of test points to evaluate the performance of the TPS40180 in a given application.
output. The output is capable of supplying up to 20A of load current. The TPS40180EVM is designed to
demonstrate the TPS40180 in a typical regulated bus to low-voltage application while providing a number
of test points to evaluate the performance of the TPS40180 in a given application.
•
Point of Load Converters
•
Graphics Cards
•
Internet Servers
•
Networking Equipment
•
Telecommunications Equipment
•
DC Power Distributed Systems
•
10.8V – 13.2V input range
•
1.5V fixed output
•
20-A DC Steady State Current
•
285kHz switching frequency per phase
•
Single Main Switch N-channel MOSFET and Two Synchronous Rectifier N-channel MOSFETs per
Phase
Phase
•
Stackable With Another EVM to Provide Higher Output Current
•
Convenient Test Points for Probing Critical Waveforms and Non-Invasive Loop Response Testing
Using the TPS40180EVM, A 20A Stackable Single Phase Synchronous Buck Converter
2
SLVU213 – May 2007