Texas Instruments EZ430-CHRONOS-868 사용자 설명서
www.ti.com
eZ430-Chronos Control Center PC Software
3.3.3 SimpliciTI™ Sync
The SimpliciTI Sync tab offers the possibility setting time/date of the watch including calibration data
conveniently.
conveniently.
Pairing watch and PC:
1. Activate the pairing on the PC by clicking on "Start Access Point". The Control Center status line
displays "Access point started. Now start watch in ACC, PPT or synch mode" when the PC is ready
2. Select "SYnC" on the eZ430-Chronos watch by pushing the "#" button.
3. Initiate pairing on the watch by pushing the "DOWN" button to activate the selected mode. After a short
3. Initiate pairing on the watch by pushing the "DOWN" button to activate the selected mode. After a short
time, the link is established.
Setting the watch:
1. Select metric or imperial units
2. Enter calibration data for the temperature and altitude OR read back the data from the watch by
2. Enter calibration data for the temperature and altitude OR read back the data from the watch by
clicking on "Read Watch"
3. Click "Copy System Time" to set watch according to read the PC system time
4. Click "Set Watch" to transfer data to watch
5. The watch shows "DONE"
6. Push the "DOWN" button on watch to end connection
4. Click "Set Watch" to transfer data to watch
5. The watch shows "DONE"
6. Push the "DOWN" button on watch to end connection
Figure 3-6. eZ430-Chronos Control Center Sync
35
SLAU292D – November 2009 – Revised March 2011
eZ430-Chronos Software
© 2009–2011, Texas Instruments Incorporated