Texas Instruments Demonstration Card for UCC24610 UCC24610EVM-693 UCC24610EVM-693 데이터 시트
제품 코드
UCC24610EVM-693
CCM Applications
www.ti.com
See
datasheet for SYNC application design information and capacitance selection.
Figure 6. Component Placement
Figure 7. Schematic of Demonstration Card
Notes:
1. Do not exceed 50 V across VD to VS.
2. Connect VS to anode pad of diode (GND).
3. Connect VD to cathode pad of diode.
4. Connect VCC to 5-V output of mother board.
5. Connect SYNC (if used) with capacitor network to primary-side MOSFET drain.
2. Connect VS to anode pad of diode (GND).
3. Connect VD to cathode pad of diode.
4. Connect VCC to 5-V output of mother board.
5. Connect SYNC (if used) with capacitor network to primary-side MOSFET drain.
6
UCC24610EVM-693 Secondary-Side Synchronous Rectifier Controller Diode
SLUU450 – September 2010
Replacement Demonstration Board
Copyright © 2010, Texas Instruments Incorporated