Texas Instruments DS90UR916Q Evaluation Module SERDESUR-916ROS/NOPB SERDESUR-916ROS/NOPB 데이터 시트
제품 코드
SERDESUR-916ROS/NOPB
SNOSB46E – MARCH 2011 – REVISED APRIL 2013
These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam
during storage or handling to prevent electrostatic damage to the MOS gates.
during storage or handling to prevent electrostatic damage to the MOS gates.
Absolute Maximum Ratings
(1) (2)
Supply Voltage – V
DDn
(1.8V)
−
0.3V to +2.5V
Supply Voltage – V
DDIO
−
0.3V to +4.0V
LVCMOS I/O Voltage
−
0.3V to +(VDDIO + 0.3V)
Receiver Input Voltage
−
0.3V to (VDD + 0.3V)
Junction Temperature
+150°C
Storage Temperature
−
65°C to +150°C
60L WQFN Package
Maximum Power Dissipation Capacity at
470mW
25°C 470mW
Derate above 25C
1/
θ
JA
mW / °C
θ
JA
(based on 9 thermal vias)
24.6 °C/W
θ
JC
(based on 9 thermal vias)
2.8 °C/W
ESD Rating (HBM)
≥
±8 kV
ESD Rating (CDM)
≥
±1 kV
ESD Rating (MM)
≥
±250 V
ESD Rating (ISO10605), R
D
= 2k
Ω
, C
S
= 150pF or R
D
= 2k
Ω
, C
S
= 330pF or R
D
= 330
Ω
, C
S
= 150pF
Air Discharge (R
IN+
, R
IN
−
)
≥
±30 kV
Contact Discharge (R
IN+
, R
IN
−
)
≥
±10 kV
ESD Rating (ISO10605), R
D
= 330
Ω
, C
S
= 330pF
Air Discharge (R
IN+
, R
IN
−
)
≥
±15 kV
Contact Discharge (R
IN+
, R
IN
−
)
≥
±10 kV
ESD Rating (IEC 61000–4–2), R
D
= 330
Ω
, C
S
= 150pF
Air Discharge (R
IN+
, R
IN
−
)
≥
±25 kV
Contact Discharge (R
IN+
, R
IN
−
)
≥
±10 kV
For soldering specifications see product folder at
and
(1)
“Absolute Maximum Ratings” indicate limits beyond which damage to the device may occur, including inoperability and degradation of
device reliability and/or performance. Functional operation of the device and/or non-degradation at the Absolute Maximum Ratings or
other conditions beyond those indicated in the
device reliability and/or performance. Functional operation of the device and/or non-degradation at the Absolute Maximum Ratings or
other conditions beyond those indicated in the
is not implied. The Recommended Operating
Conditions indicate conditions at which the device is functional and the device should not be operated beyond such conditions.
(2)
If Military/Aerospace specified devices are required, please contact the Texas Instruments Sales Office/ Distributors for availability and
specifications.
specifications.
Recommended Operating Conditions
Min
Nom
Max
Units
Supply Voltage (V
DDn
)
1.71
1.8
1.89
V
LVCMOS Supply Voltage (V
DDIO
)
1.71
1.8
1.89
V
OR
LVCMOS Supply Voltage (V
DDIO
)
3.0
3.3
3.6
V
Operating Free Air Temperature (T
A
)
−
40
+25
+105
°C
PCLK Clock Frequency
5
65
MHz
Supply Noise
(1)
50
mV
P-P
(1)
Supply noise testing was done with minimum capacitors on the PCB. A sinusoidal signal is AC coupled to the V
DDn
(1.8V) supply with
amplitude = 100 mVp-p measured at the device V
DDn
pins. Bit error rate testing of input to the Ser and output of the Des with 10 meter
cable shows no error when the noise frequency on the Ser is less than 750 kHz. The Des on the other hand shows no error when the
noise frequency is less than 400 kHz.
noise frequency is less than 400 kHz.
Copyright © 2011–2013, Texas Instruments Incorporated
7
Product Folder Links: