Texas Instruments 3.3Vout, 10W, IEEE 802.3-2005 Compliant PD Controller, PS Controller Evaluation Module for TPS23753A T TPS23753AEVM-004 데이터 시트
제품 코드
TPS23753AEVM-004
V
UVLO_R
Detection
Classification
PD Powered
Idle
V
CL_ON
V
CL_HYS
1.4V
V
CU_OFF
V
CU_HYS
Note: Variable names refer to Electrical Characteristic
Table parameters
V
VDD-VSS
V
UVLO_H
O
p
e
ra
ti
o
n
a
l
S
ta
te
TPS23753A
SLVS933B – JULY 2009 – REVISED JANUARY 2010
www.ti.com
Threshold Voltages
The TPS23753A has a number of internal comparators with hysteresis for stable switching between the various
states as shown in
states as shown in
.
relates the parameters in the Electrical Characteristics section to the
PoE states. The mode labeled idle between classification and operation implies that the DEN, CLS, and RTN
pins are all high impedance.
pins are all high impedance.
Figure 17. Threshold Voltages
PoE Startup Sequence
The waveforms of
demonstrate detection, classification, and startup from a type 1 PSE. The key
waveforms shown are V
VDD-VSS
, V
RTN-VSS
, and I
PI
. IEEE 802.3at requires a minimum of two detection levels,
however four levels are shown in this example. Four levels guard against misdetection of a device when plugged
in during the detection sequence.
in during the detection sequence.
Figure 18. PoE Startup Sequence
14
Copyright © 2009–2010, Texas Instruments Incorporated