Texas Instruments DAC8560EVM-PDK - DAC8560 Performance Demonstration Kit DAC8560EVM-PDK DAC8560EVM-PDK 데이터 시트
제품 코드
DAC8560EVM-PDK
EVM Operation
www.ti.com
2.2
EVM Performance
The EVM performance test is performed using a high-density DAC bench test board, an Agilent 3458A
digital multimeter, and a PC running the LabVIEW
digital multimeter, and a PC running the LabVIEW
®
software. The EVM board is tested for all codes of
65535 and the device under test (DUT) is allowed to settle for 1 ms before the meter is read. This process
is repeated for all codes to generate the measurements for INL and DNL.
is repeated for all codes to generate the measurements for INL and DNL.
shows the characteristic INL and DNL plots.
Figure 8. INL and DNL Characteristic Plot
3
EVM Operation
This section covers in detail the operation of the EVM to provide guidance to the user in evaluating the
onboard DAC and how to interface the EVM to a specific host processor.
onboard DAC and how to interface the EVM to a specific host processor.
See the DAC8560 data sheet,
, for information about its serial interface and other related topics.
The EVM board is factory tested and configured to operate in the unipolar output mode.
8
DAC8560 Evaluation Module
SLAU211A – March 2007 – Revised November 2009
Copyright © 2007–2009, Texas Instruments Incorporated