Texas Instruments IC MCU 16B MSP430F167IPM LQFP-64 TID MSP430F167IPM 데이터 시트
제품 코드
MSP430F167IPM
MSP430F15x, MSP430F16x, MSP430F161x
MIXED SIGNAL MICROCONTROLLER
SLAS368G − OCTOBER 2002 − REVISED MARCH 2011
11
POST OFFICE BOX 655303
•
DALLAS, TEXAS 75265
operating modes
The MSP430 has one active mode and five software selectable low-power modes of operation. An interrupt
event can wake up the device from any of the five low-power modes, service the request, and restore back to
the low-power mode on return from the interrupt program.
event can wake up the device from any of the five low-power modes, service the request, and restore back to
the low-power mode on return from the interrupt program.
The following six operating modes can be configured by software:
D
Active mode AM
−
All clocks are active
D
Low-power mode 0 (LPM0)
−
CPU is disabled
−
ACLK and SMCLK remain active. MCLK is disabled
D
Low-power mode 1 (LPM1)
−
CPU is disabled
−
ACLK and SMCLK remain active. MCLK is disabled
−
DCO’s dc generator is disabled if DCO not used in active mode
D
Low-power mode 2 (LPM2)
−
CPU is disabled
−
MCLK and SMCLK are disabled
−
DCO’s dc generator remains enabled
−
ACLK remains active
D
Low-power mode 3 (LPM3)
−
CPU is disabled
−
MCLK and SMCLK are disabled
−
DCO’s dc generator is disabled
−
ACLK remains active
D
Low-power mode 4 (LPM4)
−
CPU is disabled
−
ACLK is disabled
−
MCLK and SMCLK are disabled
−
DCO’s dc generator is disabled
−
Crystal oscillator is stopped