Microchip Technology RN42SM-I/RM 데이터 시트
RN-41-SM / RN-42-SM
www.rovingnetworks.com
rn-41sm-ds 7/12/2010
809 University Avenue
•
Los Gatos, CA 95032
•
Tel (408) 395-6539
•
info@RovingNetworks.com
Class 1 / Class 2 Bluetooth®
Socket Module
Features
•
Socket module with UART interface
•
3.3/5V logic CMOS I/O (RS-232 as well)
•
Fully qualified Bluetooth 2.1/2.0/1.2/1.1 module
•
Bluetooth v2.1+EDR support
•
Low power (8-30mA connected, 2mA idle)
•
UART supports baud rates from 1200 to 3Mbit
•
Sustained SPP data rates - 240Kbps (slave),
300Kbps (master)
300Kbps (master)
•
HCI data rates - 1.5Mbps sustained, 3.0Mbps
burst in HCI mode
burst in HCI mode
•
HCI mode, or SPP/DUN software stacks
available.
available.
•
Embedded Bluetooth stack profiles included
(requires no host stack
(requires no host stack
): GAP, SDP, RFCOMM
and L2CAP, with SPP, DUN and HID profiles.
•
RS232 on board with power enable on IO pin.
•
Bluetooth SIG Qualified, End Product Listing
•
Class 1 high power amplifier (RN-41-SM only)
with on board ceramic RF chip antenna.
with on board ceramic RF chip antenna.
o
Certifications: FCC, ICS, CE
o
Environmentally friendly, RoHS compliant
Applications
•
Cable replacement
•
Barcode scanners
•
Measurement and monitoring systems
•
Industrial sensors and controls
•
Medical devices
•
Asset tacking
Description
The RN-41-SM / RN-42-SM is a though hole, low
power and highly flexible Bluetooth socket module .
This module supports SPP/DUN and HCI Bluetooth
interface protocols, is simple to design in and fully
certified. With its high performance on chip antenna
and support for Bluetooth® Enhanced Data Rate
(EDR), the RN-41 / RN-42 delivers up to 3 Mbps data
rate for distances to 100M / 20M. The RN-41/RN-42
socket module is the perfect method for adding
Bluetooth wireless capability to existing products
without redesign, saving you significant time and
money.
power and highly flexible Bluetooth socket module .
This module supports SPP/DUN and HCI Bluetooth
interface protocols, is simple to design in and fully
certified. With its high performance on chip antenna
and support for Bluetooth® Enhanced Data Rate
(EDR), the RN-41 / RN-42 delivers up to 3 Mbps data
rate for distances to 100M / 20M. The RN-41/RN-42
socket module is the perfect method for adding
Bluetooth wireless capability to existing products
without redesign, saving you significant time and
money.
Block Diagram
CSR BlueCore-04
External
BALUN
PA
RF
Switch
Crystal
Flash
Memory
GND
VCC
USB
UART
PCM
PIO6
PIO5
PIO4