Microchip Technology MA330026 데이터 시트
2012 Microchip Technology Inc.
DS80548A-page 1
dsPIC33FJ32GP10X and
dsPIC33FJ32MC10X
The dsPIC33FJ32GP10X and dsPIC33FJ32MC10X
family devices that you have received conform
functionally to the current Device Data Sheet
(DS70652D), except for the anomalies described in this
document.
The silicon issues discussed in the following pages are
for silicon revisions with the Device and Revision IDs
listed in
family devices that you have received conform
functionally to the current Device Data Sheet
(DS70652D), except for the anomalies described in this
document.
The silicon issues discussed in the following pages are
for silicon revisions with the Device and Revision IDs
listed in
. The silicon issues are summarized in
The errata described in this document will be addressed
in future revisions of the dsPIC33FJ32GP10X and
dsPIC33FJ32MC10X silicon.
in future revisions of the dsPIC33FJ32GP10X and
dsPIC33FJ32MC10X silicon.
Data Sheet clarifications and corrections start on
,
following the discussion of silicon issues.
The silicon revision level can be identified using the
current version of MPLAB
The silicon revision level can be identified using the
current version of MPLAB
®
IDE and Microchip’s
programmers, debuggers and emulation tools, which
are available at the Microchip corporate web site
(
are available at the Microchip corporate web site
(
www.microchip.com
).
For example, to identify the silicon revision level using
MPLAB IDE in conjunction with MPLAB ICD 3 or
PICkit™ 3:
1.
MPLAB IDE in conjunction with MPLAB ICD 3 or
PICkit™ 3:
1.
Using the appropriate interface, connect the device
to the MPLAB ICD 3 programmer/debugger or
PICkit 3.
to the MPLAB ICD 3 programmer/debugger or
PICkit 3.
2.
From the main menu in MPLAB IDE, select
Configure>Select Device, and then select the
target part number in the dialog box.
Configure>Select Device, and then select the
target part number in the dialog box.
3.
Select the MPLAB hardware tool
(Debugger>Select Tool).
(Debugger>Select Tool).
4.
Perform a “Connect” operation to the device
(Debugger>Connect). Depending on the devel-
opment tool used, the part number and Device
Revision ID value appear in the Output window.
(Debugger>Connect). Depending on the devel-
opment tool used, the part number and Device
Revision ID value appear in the Output window.
The Device and Revision ID values for the various
dsPIC33FJ32GP10X and dsPIC33FJ32MC10X silicon
revisions are shown in
dsPIC33FJ32GP10X and dsPIC33FJ32MC10X silicon
revisions are shown in
Note:
This document summarizes all silicon
errata issues from all revisions of silicon,
previous as well as current. Only the
issues indicated in the last column of
errata issues from all revisions of silicon,
previous as well as current. Only the
issues indicated in the last column of
apply to the current silicon
revision (A0).
Note:
If you are unable to extract the silicon
revision level, please contact your local
Microchip sales office for assistance.
revision level, please contact your local
Microchip sales office for assistance.
TABLE 1:
SILICON DEVREV VALUES
Part Number
Device ID
Revision ID for Silicon Revision
(
)
A0
dsPIC33FJ32GP101
0x0A00
0x3000
dsPIC33FJ32GP102
0x0A01
dsPIC33FJ32GP104
0x0A03
dsPIC33FJ32MC101
0x0A04
dsPIC33FJ32MC102
0x0A05
dsPIC33FJ32MC104
0x0A07
Note 1: The Device and Revision IDs (DEVID and DEVREV) are located at the last two implemented addresses in
program memory.
2: Refer to the “dsPIC33F Flash Programming Specification for Devices with Volatile Configuration Bits”
(DS70659) for detailed information on Device and Revision IDs for your specific device.
dsPIC33FJ32GP10X and dsPIC33FJ32MC10X Family Silicon
Errata and Data Sheet Clarification