Microchip Technology SW006021-2 사용자 설명서
![Microchip Technology](https://files.manualsbrain.com/attachments/cf42c3c895ef469f06d2e47e97fd98d738fcf5cf/common/fit/150/50/7340124dc8aa983aaf764094e2f06faab86f306c03111c5817f7e4e53fb2/brand_logo.gif)
MPLAB
®
XC8 C Compiler User’s Guide
DS52053B-page 284
2012 Microchip Technology Inc.
7.2.28
--DISL=message numbers Disable Messages
This option is mainly used by the command-line driver, xc8, to disable particular
message numbers. It takes a comma-separate list of message numbers that will be
disabled during compilation.
message numbers. It takes a comma-separate list of message numbers that will be
disabled during compilation.
This option is applied if compiling using xc8, the command-line driver and the
--MSGDISABLE
--MSGDISABLE
driver option, see Section 4.8.38 “--MSGDISABLE: Disable
See Section 4.6 “Compiler Messages” for full information about the compiler’s
messaging system.
messaging system.
7.2.29
--EDF=message file: Set Message File Path
This option is mainly used by the command-line driver, xc8, to specify the path of the
message description file. The default file is located in the dat directory in the compiler’s
installation directory.
message description file. The default file is located in the dat directory in the compiler’s
installation directory.
See Section 4.6 “Compiler Messages” for full information about the compiler’s
messaging system.
messaging system.
7.2.30
--EMAX=number: Specify Maximum Number of Errors
This option is mainly used by the command-line driver, xc8, to specify the maximum
number of errors that can be encountered before the assembler terminates. The default
number is 10 errors.
number of errors that can be encountered before the assembler terminates. The default
number is 10 errors.
This option is applied if compiling using xc8, the command-line driver and the
--ERRORS
--ERRORS
driver option, see Section 4.8.29 “--ERRORS: Maximum Number of
See Section 4.6 “Compiler Messages” for full information about the compiler’s
messaging system.
messaging system.
7.2.31
--NORLF: Do Not Relocate List File
Use of this option prevents the linker applying fixups to the assembly list file produced
by the assembler. This option is normally using by the command line driver, xc8, when
performing pre-link stages, but is omitted when performing the final link step so that the
list file shows the final absolute addresses.
by the assembler. This option is normally using by the command line driver, xc8, when
performing pre-link stages, but is omitted when performing the final link step so that the
list file shows the final absolute addresses.
If you are attempting to resolve fixup errors, this option should be disabled so as to fixup
the assembly list file and allow absolute addresses to be calculated for this file. If the
compiler driver detects the presence of a preprocessor macro __DEBUG which is
equated to 1, then this option will be disabled when building. This macro is set when
choosing a Debug build in MPLAB IDE, so always have this selected if you encounter
such errors.
the assembly list file and allow absolute addresses to be calculated for this file. If the
compiler driver detects the presence of a preprocessor macro __DEBUG which is
equated to 1, then this option will be disabled when building. This macro is set when
choosing a Debug build in MPLAB IDE, so always have this selected if you encounter
such errors.
7.2.32
--VER: Print Version Number
This option printed information relating to the version and build of the linker. The linker
will terminate after processing this option, even if other options and files are present on
the command line.
will terminate after processing this option, even if other options and files are present on
the command line.