Microchip Technology TMPSNSRD-TCPL1 데이터 시트
Installation and Operation
© 2010 Microchip Technology Inc.
DS51889A-page 13
2.3.2
Software Setup
Once the USB interface is secured, start the Thermal Management Software. When the
software starts, if the hardware is successfully detected then the GUI will be displayed.
software starts, if the hardware is successfully detected then the GUI will be displayed.
FIGURE 2-2:
Thermocouple Reference Design GUI.
This configuration window allows the user to set some of parameters, such as
measurement unit and calibration temperature.
measurement unit and calibration temperature.
The Play, Stop and Reset icons can be used to perform continuous data-log. The
Record icon enables the user to data-log to an external file. The logging interval can
be adjusted using the Interval Scroll bar from 100 ms to 30s.
Record icon enables the user to data-log to an external file. The logging interval can
be adjusted using the Interval Scroll bar from 100 ms to 30s.
FIGURE 2-3:
Real-Time Acquisition.
Thermocouple output is using the compensation equation provided by National
Institute of Standards and Technology (NIST ITS-90). The linearization is implemented
in the PICmicro microcontroller.
Institute of Standards and Technology (NIST ITS-90). The linearization is implemented
in the PICmicro microcontroller.
Start Real-Time acquisition
Stop Real-Time acquisition
Reset Real-Time acquisition
Start/Record Real-Time acquisition
Stop Recording Real-Time acquisition