Microchip Technology PICkit 3 Starter Kit DV164130 DV164130 사용자 설명서
제품 코드
DV164130
PICkit™ 3 USER’S GUIDE
© 2009 Microchip Technology Inc.
DS51795A-page 41
Chapter 8. Error Messages
8.1
INTRODUCTION
The PICkit 3 programmer/debugger produces many different error messages; some
are specific and others can be resolved with general corrective actions.
are specific and others can be resolved with general corrective actions.
8.2
SPECIFIC ERROR MESSAGES
PICkit 3 programmer/debugger error messages are listed below in numeric order.
Text in error messages listed below of the form %x (a variable) will display as text
relevant to your particular situation in the actual error message.
relevant to your particular situation in the actual error message.
PK3Err0001: Failed while writing to program memory.
PK3Err0002: Failed while writing to EEPROM.
PK3Err0003: Failed while writing to configuration memory.
PK3Err0005: PICkit 3 is currently busy and cannot be unloaded at this time.
If you receive this error when attempting to deselect the debugger as a debugger
or programmer:
or programmer:
1.
Wait – give the debugger time to finish any application tasks. Then try to
deselect the debugger again.
deselect the debugger again.
2.
Select Halt to stop any running applications. Then try to deselect the
debugger again.
debugger again.
3.
Unplug the debugger from the PC. Then try to deselect the debugger again.
4.
Shut down MPLAB IDE.
PK3Err0006: Failed while writing to user ID memory.
PK3Err0007: Failed while reading program memory.
PK3Err0008: Failed while reading EEPROM.
PK3Err0009: Failed while reading configuration memory.
PK3Err0010: Failed while reading user ID memory.
PK3Err0011: Bulk erase failed.
If these do not work, try another device.
Note:
Numbers may not yet appear in displayed messages. Use the Search tab
on the Help viewer to find your message and highlight it below.
on the Help viewer to find your message and highlight it below.