Microchip Technology TSSOP20EV 데이터 시트
20-PIN TSSOP AND SSOP
EVALUATION BOARD
USER’S GUIDE
© 2009 Microchip Technology Inc.
DS51875A-page 5
Preface
INTRODUCTION
This chapter contains general information that will be useful to know before using the
20-Pin TSSOP and SSOP Evaluation Board. Items discussed in this chapter include:
20-Pin TSSOP and SSOP Evaluation Board. Items discussed in this chapter include:
DOCUMENT LAYOUT
This document describes how to use the 20-Pin TSSOP and SSOP Evaluation Board.
The manual layout is as follows:
The manual layout is as follows:
• Chapter 1. “Product Overview” – Important information about the 20-Pin
TSSOP and SSOP Evaluation Board.
• Chapter 2. “Installation and Operation” – Includes instructions on how to get
started with this evaluation board.
• Appendix A. “Schematic and Layouts” – Shows the schematic and layout
diagrams for the 20-Pin TSSOP and SSOP Evaluation Board.
• Appendix B. “Bill Of Materials (BOM)” – Lists the parts that can be installed
onto the 20-Pin TSSOP and SSOP Evaluation Board.
NOTICE TO CUSTOMERS
All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our web site
(www.microchip.com) to obtain the latest documentation available.
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our web site
(www.microchip.com) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXA”, where “XXXXX” is the document number and “A” is the revision level of the
document.
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXA”, where “XXXXX” is the document number and “A” is the revision level of the
document.