Insys GSM Small 11-02-01-03-02.001 사용자 설명서
제품 코드
11-02-01-03-02.001
7. Command Overview
41
ATQ<n>
Sets result code presentation mode
<n>
0
Result codes are transmitted
1
Result codes are not transmitted
ATS0?
Query automatic auto answer
ATS0=<n>
Auto answer after <n> call signals (RING)
<n>
0 off
1..255
on
ATV<n>
Set format mode for result code
<n>
0
Short response (numerical code)
1
Response in text form
ATX<n>
Sets CONNECT result code format and connection monitoring
<n>
0
Numerical response for CONNECT, no dial tone
detection, no busy detection
detection, no busy detection
1
Text response for CONNECT, no dial tone detection, no
busy detection
busy detection
2
Text response for CONNECT, dial tone detection, no
busy detection
busy detection
3
Text response for CONNECT, no dial tone detection,
busy detection
busy detection
4
Text response for CONNECT, dial tone detection, busy
detection
detection
ATZ
Resets all current parameters to user profile, an existing connection will be
terminated.
terminated.
The timers for time-controlled automatic functions possibly set with AT^SCFG
will restart here (see also: “6.3 Automatic Execution of AT Commands during
Operation).
AT&C<n>
Set function type of the control line DCD
<n>
0
DCD is always active
1
DCD shows the presence of the carrier signal
AT&D<n>
Set function type of the control line DTR (change ONÆOFF)
<n>
0 Ignored
1
Change to command mode, connection maintained
2
Change to command mode, connection terminated, no
automatic connection acceptance while DTR off
automatic connection acceptance while DTR off
AT&F
Set all current parameters to factory defaults
The timers for time-controlled automatic functions possibly set with AT^SCFG
will restart here (see also: “6.3 Automatic Execution of AT Commands during
Operation).
The timers for time-controlled automatic functions possibly set with AT^SCFG
will restart here (see also: “6.3 Automatic Execution of AT Commands during
Operation).
Version 1.00 / 09.04