Ansmann Digispeed 4 Ultra 5707153 데이터 시트

used with this charger. Inferior batteries could cause destruction of rechargeable batteries and the 

charger, if the cells used are not suitable for fast charging. If unsuitable cells are inserted into this 

charger, warranty claims cannot be accepted and the warranty will become void.
OperatiON                                 
Place the charger on a level surface and ensure that the vents are not covered. Once the unit is 

connected to the mains (see type plate), and the corresponding (NiMH or NICd) rechargeable battery is 

inserted, the charging process starts automatically.  When inserting the batteries please pay attention 

to the correct polarity and type (NiMH/NiCd). When several cells are to be charged, they do not need to 

be inserted at the same time, as the charging process starts individually. A certain amount of heating 

of the batteries during charging is normal. After End of Fast Charge please wait 10 minutes before 

using the charger again!
eNvirONmeNt                                                                
Rechargeable batteries are not to be disposed of in domestic waste. Return used batteries to your 

dealer or even better to a battery collection point. 
maiNteNaNCe aND CleaNiNg
To maintain and clean the unit disconnect it from the mains. Only use a dry cloth for cleaning.
WarraNty
For this item you have a 3 years warranty. There is no warranty for the included batteries!!
speCifiCatiON
Input voltage: 100-240V AC 
Charging current: 
Mignon AA 

4400 mA 

2200 mA  

Micro AAA 

1100 mA  

550 mA

For best charging results it is recommended to use this charger with ANSMANN rechargeable batteries!