Samson Stage 166 Wirless Microphone SWV166SHT6U 데이터 시트

Stage v166: Handheld Wireless System

1.  Audio ON/OFF Switch - When set to the ON position, audio signal 

is transmitted.  When set to the OFF position, the audio signal is 

muted.  Note that moving this switch to the OFF position does not 

turn off the transmitter power—it is simply a way to temporarily 

mute the transmission of audio signal. When not in use for extended 

periods, the transmitter power should be turned off by using the 

power ON/OFF switch.

2.  Power ON/OFF Switch - Use this switch to turn the HT6 on or off (to 

conserve battery power, be sure to leave it off when not in use). 

Be sure to mute the audio signal at your external mixer or amplifier 

before turning transmitter power on or off, or an audible pop may 

result.

3.  Power Indicator - LED lights green when the transmitter is powered 

on. 

4.  Battery Compartment - Insert a standard 9-volt alkaline battery 

here. Be sure to observe the plus and minus polarity markings when 

installing the battery.  We recommend the Duracell MN 1604 type 

battery for use with this device.  Although rechargeable Ni-Cad 

batteries can be used, they do not supply adequate current for more 

than four hours.   

WARNING:  Do not insert the battery backwards; doing so can cause 

severe damage to the HT6 and will void your warranty.

5.  Channel Marking - Printed number corresponding to the appro-

priate channel on the SR166 receiver. 

1

3

4

5

2

1

3

4

5

2