Texas Instruments MSP-EXP430G2 사용자 설명서
User's Guide
SLAU318C – July 2010 – Revised August 2012
MSP-EXP430G2 LaunchPad Experimenter Board
1
MSP-EXP430G2 LaunchPad Overview
1.1
Overview
The MSP-EXP430G2 low-cost experimenter board called LaunchPad is a complete development solution
for the Texas Instruments MSP430G2xx Value Line series. The integrated USB-based emulator offers all
the hardware and software necessary to develop applications for all MSP430G2xx series devices. The
LaunchPad has an integrated DIP target socket that supports up to 20 pins, allowing MSP430™ Value
Line devices to be dropped into the LaunchPad board. It also offers an on-board flash emulation tool
allowing direct interface to a PC for easy programming, debugging, and evaluation. The LaunchPad
experimenter board is capable of programming the eZ430-RF2500T target boards, the eZ430-Chronos
watch module or the eZ430-F2012T/F2013T target boards. The USB interface provides a 9600-Baud
UART serial connection from the MSP430G2xx device to the host PC or a connected target board.
for the Texas Instruments MSP430G2xx Value Line series. The integrated USB-based emulator offers all
the hardware and software necessary to develop applications for all MSP430G2xx series devices. The
LaunchPad has an integrated DIP target socket that supports up to 20 pins, allowing MSP430™ Value
Line devices to be dropped into the LaunchPad board. It also offers an on-board flash emulation tool
allowing direct interface to a PC for easy programming, debugging, and evaluation. The LaunchPad
experimenter board is capable of programming the eZ430-RF2500T target boards, the eZ430-Chronos
watch module or the eZ430-F2012T/F2013T target boards. The USB interface provides a 9600-Baud
UART serial connection from the MSP430G2xx device to the host PC or a connected target board.
The MSP-EXP430G2 can be used with IAR Embedded Workbench™ Integrated Development
Environment (IDE) or Code Composer Studio™ (CCS) IDE to write, download, and debug applications.
The debugger is unobtrusive, allowing the user to run an application at full speed with hardware
breakpoints and single stepping available while consuming no extra hardware resources.
Environment (IDE) or Code Composer Studio™ (CCS) IDE to write, download, and debug applications.
The debugger is unobtrusive, allowing the user to run an application at full speed with hardware
breakpoints and single stepping available while consuming no extra hardware resources.
MSP-EXP430G2 LaunchPad features:
•
USB debugging and programming interface featuring a driverless installation and application UART
serial communication with up to 9600 Baud
serial communication with up to 9600 Baud
•
Supports all MSP430G2xx and MSP430F20xx devices in PDIP14 or PDIP20 packages
•
Two general-purpose digital I/O pins connected to green and red LEDs for visual feedback
•
Two push button for user feedback and device reset
•
Easily accessible device pins for debugging purposes or as socket for adding customized extension
boards
boards
•
High-quality 20-pin DIP socket for an easy plug-in or removal of the target device
5
SLAU318C – July 2010 – Revised August 2012
MSP-EXP430G2 LaunchPad Experimenter Board
Copyright © 2010–2012, Texas Instruments Incorporated