Insys GSM 4.2 LOGO! compact KIT 11-02-01-03-04.004 사용자 설명서
![Insys](https://files.manualsbrain.com/attachments/c99a5ca6a2d5e1f8a349c253c85c8050e2b3fb57/common/fit/150/50/e04e755637c125d0009b913065b90f1728ba83de20e00c2edf9cad569234/brand_logo.gif)
제품 코드
11-02-01-03-04.004
Commisioning
INSYS GSM 4.2 LOGO!
28
Dezember
06
12.
Check the field strength of the GSM signal using the Detect GSM intensity button:
The reply should indicate a field strength of at least 12; otherwise, the antennal
must be relocated.
must be relocated.
4.4
Troubleshooting
4.4.1 No response to commands
¾
The INSYS GSM 4.2 LOGO! and the terminal (configuration PC or controller)
must operate the serial interface with the same baud rate and data format
(default: 19,200 bits per second, 8N1).
(default: 19,200 bits per second, 8N1).
¾
The INSYS GSM 4.2 LOGO! can be reset to the factory settings by holding
down the Reset button (> 25 s).
4.4.2 A connection is not established
¾
Check the signal quality of the GSM network.
¾
Is the INSYS GSM 4.2 LOGO! logged in?
¾
Is the SIM card activated for incoming data connections?
¾
Has the call number been selected for the data connection?
¾
Is there sufficient power supply for transmittal?
4.4.3 Alarm SMS is not transmitted
Was the SMS service center number entered correctly?
¾
¾
Deactivate DTR drop if no device is connected at the serial interface or the
device does not support the DTR function.
¾
Deactivate handshake if no device is connected at the serial interface or the
device does not support the hardware handshake.