Insys Modem 56k 4.1 m/UL 11-02-01-01-40.022 사용자 설명서
![Insys](https://files.manualsbrain.com/attachments/c99a5ca6a2d5e1f8a349c253c85c8050e2b3fb57/common/fit/150/50/e04e755637c125d0009b913065b90f1728ba83de20e00c2edf9cad569234/brand_logo.gif)
제품 코드
11-02-01-01-40.022
INSYS Modem 56k UL
Configiration
Juni 05
11
4.3.2 International Settings
INSYS Modem 56k can be adjusted to the line requirements of 87 countries worldwide by
a configuration command. The country codes for the firmware versions “standard coun-
tries” and “further countries” are listed in chapter 8. Some countries do not require a
separate adaptation but are using the standards “TBR21 (Europe)” or “ITU/Taiwan”.
TBR21 is the accurate setting for the countries of the European Union, Switzerland,
Liechtenstein, Norway and Iceland. Select the explicit country code only when INSYS Mo-
dem is connected to an older private branch exchange (PBX).
INSYS Modem 144 and 336 are configured for operation in western Europe (TBR21) only.
a configuration command. The country codes for the firmware versions “standard coun-
tries” and “further countries” are listed in chapter 8. Some countries do not require a
separate adaptation but are using the standards “TBR21 (Europe)” or “ITU/Taiwan”.
TBR21 is the accurate setting for the countries of the European Union, Switzerland,
Liechtenstein, Norway and Iceland. Select the explicit country code only when INSYS Mo-
dem is connected to an older private branch exchange (PBX).
INSYS Modem 144 and 336 are configured for operation in western Europe (TBR21) only.
4.3.3 Dial Tone Detection
When dial tone detection is active, a dial attempt without the presence of a dial tone
being detected is aborted with the message NO DIALTONE. Without dial tone detection
dialing is attempted and reports NO CARRIER if not successful. Dialing without dial tone
detection is often required behind a private branch exchange (PBX).
Attempts to call a busy line is answered by the message BUSY in both cases.
being detected is aborted with the message NO DIALTONE. Without dial tone detection
dialing is attempted and reports NO CARRIER if not successful. Dialing without dial tone
detection is often required behind a private branch exchange (PBX).
Attempts to call a busy line is answered by the message BUSY in both cases.
4.3.4 Auto Answer Mode
The modem is answering incoming calls after the specified number of RING indications
autonomously.
autonomously.
4.3.5 AT Commands For The Telephone Line
Command Description
ATA answer
mode
AT*A
auto answer mode lock
ATB
modulation for 300 Baud
AT\B
send break signal
AT%B
power up and down of the key abort at dial-up
AT%C Enable
data
compression
AT\N
select error correction
ATW
error correction messages
AT\A
MNP block size
AT*L
auto speed limit
AT+MR
modulation type display (INSYS Modem 56k only)
AT+MS
modulation type selection
AT%E retrain
AT+GCI
country code selection (INSYS Modem 56k only)
ATD dial
ATH hang
up