Ideal Electrical Test-Pro Digitalmultimeter 340-Serie Digital-Multimeter, DMM, 61-340 데이터 시트
제품 코드
61-340
Hz
AC/DC Current (A )
Specifications
General Features
Display:
Display:
3999 Count LCD / 3-3/4 Digit
Refresh Rate:
2.5x/sec.
Over range:
“OL” is displayed
Polarity:
Automatic (no indication for
positive polarity); Minus(-) sign
for negative polarity
positive polarity); Minus(-) sign
for negative polarity
True-RMS:
61-342 only.
Auto Power Off: After 10 minutes of non-use
Low Battery:
Low Battery:
is displayed if battery voltage
drops below operating voltage
Altitude:
6561.7 ft. (2000m)
Accuracy:
Stated accuracy at 73° ±41°F
(23° ±5°C), < 75% R.H.
(23° ±5°C), < 75% R.H.
Batteries:
9VDC NEDA 1604
Battery Life:
200 hrs. (61-340)
150 hrs. (61-342)
150 hrs. (61-342)
Fuse:
0.5A/500V (#F-340)
10A/1000V (#F-341)
10A/1000V (#F-341)
Operating
32° to 104°F (0° to 40°C)
environment:
at < 75% R.H.
Storage
-4° to 140°F (-20° to 60°C)
environment:
at < 80% R.H.
Weight:
13.6 oz (386g)
Size:
7.0"H x 3.5"W x 1.9"D
(177mmHx89mmWx48mmD)
(177mmHx89mmWx48mmD)
Accessories
Test leads (TL-310), 9V battery,
Included:
Operating Instructions
Safety
Complies with UL/IEC/EN 61010-1,
Certification:
61010-031, Cat III-600V
Equipment protected by double
insulation.
insulation.
Instrument has been evaluated and complies with
insulation category III (overvoltage category III) for
measurements performed in the building installation.
Pollution degree 2 in accordance with IEC-644.
Indoor use.
insulation category III (overvoltage category III) for
measurements performed in the building installation.
Pollution degree 2 in accordance with IEC-644.
Indoor use.
C
US
N12966
+
Maintenance
Clean the case with a damp cloth and mild deter-
gent. Do not use abrasives or solvents.
gent. Do not use abrasives or solvents.
Service and Replacement
Parts
Parts
No user-serviceable parts.
For replacement parts or to inquire about service
information contact IDEAL INDUSTRIES, INC. at
1-877-201-9005 or visit our website @
www.testersandmeters.com.
information contact IDEAL INDUSTRIES, INC. at
1-877-201-9005 or visit our website @
www.testersandmeters.com.
Warranty Statement
This tester is warranted to the original purchaser
against defects in material and workmanship for
two years from the date of purchase. During this
warranty period, IDEAL INDUSTRIES, INC. will, at
its option, replace or repair the defective unit, sub-
ject to verification of the defect or malfunction.
against defects in material and workmanship for
two years from the date of purchase. During this
warranty period, IDEAL INDUSTRIES, INC. will, at
its option, replace or repair the defective unit, sub-
ject to verification of the defect or malfunction.
This warranty does not cover fuses, batteries or
damage from abuse, neglect, accident, unautho-
rized repair, alteration, or unreasonable use of the
instrument.
damage from abuse, neglect, accident, unautho-
rized repair, alteration, or unreasonable use of the
instrument.
Any implied warranties arising out of the sale of an
IDEAL product, including but not limited to implied
warranties of merchantability and fitness for a par-
ticular purpose, are limited to the above. The man-
ufacturer shall not be liable for loss of use of the
instrument or other incidental or consequential
damages, expenses, or economic loss, or for any
claim or claims for such damage, expenses or eco-
nomic loss.
IDEAL product, including but not limited to implied
warranties of merchantability and fitness for a par-
ticular purpose, are limited to the above. The man-
ufacturer shall not be liable for loss of use of the
instrument or other incidental or consequential
damages, expenses, or economic loss, or for any
claim or claims for such damage, expenses or eco-
nomic loss.
State laws vary, so the above limitations or exclu-
sions may not apply to you. This warranty gives
you specific legal rights, and you may also have
other rights which vary from state to state.
sions may not apply to you. This warranty gives
you specific legal rights, and you may also have
other rights which vary from state to state.
DC
A
Closed
Circuit
Circuit
Open
Circuit
Ω
WARNING: To avoid electric shock, dis-
connect test leads before removing battery cover.
WARNING: For continued protection
against fire, replace only with fuses of the speci-
fied voltage, current and rupture speed ratings.
fied voltage, current and rupture speed ratings.
Bad Diode
Good Diode
Open
Shorted
Foward
Reverse
Diode Test ( )
Frequency (Hz) /
Duty Cycle(%)
WARNING: De-energize circuit first.
WARNING: De-energize circuit before
checking diode.
Note: On noisy circuits, turn dial to V, then
toggle Hz button.
toggle Hz button.
WARNING: To avoid electric shock, do
not place test leads or thermocouple on a
voltage source.
voltage source.
~
Toggle for
AC
AC
Toggle for
Hz
Hz
Toggle for
•
•
)
)
)
Toggle for
Reverse
(Remove tilt stand)
Audible Continuity (
•
)
)
)
)
+
–
Temperature
Data Hold
Hold
Press to hold
present value in
display; depress to
release display.
Min/Max
Relative Mode
Toggle for
Relative Mode
Press to deduct
reference value;
reference value;
depress to exit
mode.
Backlight
Press >1 sec.
for backlight ( )
for backlight ( )
Backlight stays
illuminated for
10 sec.
illuminated for
10 sec.
Range
Toggle to manual
range on following
functions: Volts,
Ohms, Amps.
Hold for >1sec. to
exit mode.
Turn power off, break circuit, insert meter in
series, then turn power back on.
series, then turn power back on.
WARNINGS:
• Check fuse for continuity before testing.
• Use the proper switch position and lead
• Use the proper switch position and lead
inputs.
• Never attempt to measure current on
circuits or equipment with more than
600 volts potential.
600 volts potential.
• Duty cycle: 15sec ON / 15min OFF for
10A MAX
Toggle for
°C
°C
Toggle for
Duty Cycle
Duty Cycle
Toggle for
Min/Max
Min/Max
Hold for >1sec.
to exit mode.
to exit mode.
MAX MIN
Capacitance ( )
nF
WARNING: De-energize circuit before
taking resistance measurement.
WARNING: De-energize circuit and
discharge capacitor before taking capaci-
tance measurement.
Measuring time: < 15sec for <400µF
tance measurement.
Measuring time: < 15sec for <400µF
< 1min for <4000µF
MΩ
Resistance (
Ω)
Toggle for
Battery & Fuse Replacement
~
ND 6447-1 61-340 61-342 Ins 3/17/08 6:42 AM Page 8