Insys WLAN Bridge 11-02-01-06-03.001 사용자 설명서

General Information About Wireless LAN 

 

3 

 
All WLAN devices connect to an 
AccessPoint which routes data 
between the connected devices and 
to a wire-bound LAN. Several 
AccessPoints can establish a joint 
WLAN (with the same SSID code) and 
also allow transparent handover. 
The infrastructure mode is the 
standard operating mode. 
 
 
 

 
WLAN devices can also merge without a 
dedicated master and form an adhoc 
network (peer-to-peer communication). 
The first active device will assume the 
master role. 
The adhoc mode is a part of the WLAN 
standard, but is not completely supported 
by all WLAN devices.  
 
 

When an application under Microsoft Windows requires a serial interface, which is not  
available physically, a virtual COM port driver is needed. The virtual COM port driver 
transforms the data intended for the serial interface into IP data, which are then 
transmitted via a network. 
INSYS MICROELECTRONICS provides a free virtual COM port driver. 
 
 

version 1.01 / 10.04